Avid Pro Audio Community - Major PT Problem with Carbon..Please Advise

Avid Pro Audio Community (https://duc.avid.com/index.php)

- Pro Tools | Carbon (https://duc.avid.com/forumdisplay.php?f=161)

- - Major PT Problem with Carbon..Please Advise (https://duc.avid.com/showthread.php?t=415375)

Major PT Problem with Carbon..Please Advise

So everything has been going great last couple days, but today I had some spinning wheels of death after adding various plug ins (some native, some UAD with my satellite). Finally tonight, it crashed hard and I decided to upgrade to what PT says is version 21.3.1.176.

Upon launching PT I am getting the following errors:

https://www.dropbox.com/s/8wrbma2edg...%20PM.png?dl=0

Also:

https://www.dropbox.com/s/ofo47dbh2k...%20PM.png?dl=0

No sound when playing back a session, as the mix buss is not available due to DSP resources. Needless to say, no DSP is being used by Carbon at the moment, I'm just playing a native session back.

Restarted the Mac, no joy. I am on a 2017 iMac using System 10.15.7

UPDATE:

OK totally unplugged Carbon, restarted. Life is good again. Sorry but that was a bad scare!

Re: Major PT Problem with Carbon..Please Advise

Quote:

Originally Posted by tomhartman (Post 2602017)

Good you got it sorted I had one scare (Totally user error ) I had connected and outboard comp and had forgot to turn it's gain knob down and had screwed up the I/O and when I fired it up the My monitors screamed and Carbon went into full max red meters and then went silent I thought I "oh god I just fried it" but I did the same thing turned down the comp shut down unplugged everything and replugged and rebooted re did the I/O and everything was fine