The Mic Signal is Low?
 

Hi,
I am using HD Omni / Native...
I am trying to Recored a Vocal but the Signal for the Mic1 or Mic 2 are Low (25% from the Track Vol Level).
I have Change P1/P2 to 65+ but still the same....

Any Advice how I Can get the Volume / Signal higher?


Thanks

Re: The Mic Signal is Low?
 

any one?

Re: The Mic Signal is Low?
 

What mic are you using?
Are you using an XLR to XLR Cable or XLR to 1/4 RTS connector to the Omni

Bobcat

Re: The Mic Signal is Low?
 

Rode NT2-A mic using an XLR to XLR Cable

Re: The Mic Signal is Low?
 

did you try another cable? maybe it's broken...

Re: The Mic Signal is Low?
 

Make sure Mic is selected and the 48V button is lit.

Greg

Re: The Mic Signal is Low?
 

he would not hear anything if phantom power was off or mic was not selected...

Re: The Mic Signal is Low?
 

The Mic selected and 48v On and the XLR cable is New.
I am now traveling and will be back home after 3 weeks.
I will Try factory reset when I come back ... it might help...
But I am afraid that this could be an issue/defect in the Unit.. do you think it could be?

Re: The Mic Signal is Low?
 

I just started having the exact same problem. Made me feel like an idiot trying to figure out what was wrong, but I'm starting to think it's the OMNI and not user error.

JR

Re: The Mic Signal is Low?
 

Try Factory Reset... and Let me know if it's work.
I am currentlly out of Home Traveling and will be back @ sep. so I can't do that until I come back...