Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools | Sync X & SYNC HD (https://duc.avid.com/forumdisplay.php?f=163)
-   -   Feed External word Clock to SYNC HD (https://duc.avid.com/showthread.php?t=416127)

bloodstar57 07-07-2021 11:53 PM

Feed External word Clock to SYNC HD
 
Hello All:

I need some help with a concept.
Is it possible and/or advisable to feed an external word clock to the Sync HD that is master, in a loop sync with an Omni and HD I/O; from a superior clock like Grimm CC1 or 2? If possible would cause more jitter?

LukeHoward 07-08-2021 10:04 PM

Re: Feed External word Clock to SYNC HD
 
Quote:

Originally Posted by bloodstar57 (Post 2607220)
Hello All:

I need some help with a concept.
Is it possible and/or advisable to feed an external word clock to the Sync HD that is master, in a loop sync with an Omni and HD I/O; from a superior clock like Grimm CC1 or 2? If possible would cause more jitter?

Chapter 5 of the Grimm manual explains configuration in more detail. I'm skeptical as to the benefit of an external clock (except to the extent it is useful workflow wise), but YMMV.

bloodstar57 07-10-2021 05:41 AM

Re: Feed External word Clock to SYNC HD
 
Quote:

Originally Posted by LukeHoward (Post 2607338)
Chapter 5 of the Grimm manual explains configuration in more detail. I'm skeptical as to the benefit of an external clock (except to the extent it is useful workflow wise), but YMMV.

So I attempted to feed the Sync HD clock from the Neve MBC- while the Sync, omni and HD I/O are connected in loop sync- and the system bugged out. It lost lock, starting making feedback noise and, would not play. Did I perhaps do something wrong?


All times are GMT -7. The time now is 05:43 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com