Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   System 5 (https://duc.avid.com/forumdisplay.php?f=63)
-   -   PatchNet not saving monitor patches (https://duc.avid.com/showthread.php?t=417167)

Mike Rosoft 09-24-2021 03:05 AM

PatchNet not saving monitor patches
Hi :-) At my work we have System5 fusion. SC264D system computer with two dsp cards and without the analog monitor-comm interface module, madi monitoring and external converters are used.

This problem persists since the beginning and through several eMix upgrades and reinstalls. eMix version is 6.1.0 b19.5 (93592).
So the problem is, in every title, newly created from scratch or old template used, the eMix isn't saving the monitoring patches. No matter what patches are made and saved, after relaunching the title the CR main monitors are defaulted to card 1B, channel 1 to 8 (which is not convenient since the studio is wired differently and one have to manually repatch this section on every console boot). The monitor A section is getting erased, the monitor B C and D are functioning fine.

Any ideas or help will be appreciated :-)

Steven1145 12-17-2021 05:16 AM

Re: PatchNet not saving monitor patches
There is a Registry input that you need to change, otherwise the CR will always default to that output.
It is HKEY_CURRENT_USER/Software/Euphonix/eMix/Persistent/Monitors/VariableMADIOutputs

Change the ControlRoomMADIPort entry to 28 (anything above the actual number of ports you have will work), save, and reboot.

Note: do a backup of your registry before tweaking, I am not liable for any errors you could make.

Mike Rosoft 01-15-2022 12:00 PM

Re: PatchNet not saving monitor patches
Works perfectly !
Thanks a lot !
:-) :-)

All times are GMT -7. The time now is 04:33 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com