ADR FOLEY
 

Got a 5.1 system. Used to do adr/foley with Machine Control on a 3/4". Need to do the same with Quicktime and other video formats. What hardware and software do I add?
Thanks,
Ron

Re: ADR FOLEY
 

please list what gear you have now and what OS you are on.
ie.
G-4 graphite running 9.1
mix
usd

Re: ADR FOLEY
 

I'M RUNNING 9.2 ON A G-4 (500 MHZ)...5.1 TDM...ONE FARM CARD. I HAVE A SONY DV CONVERTER FOR FIREWIRE OUTPUT FOR VIEWING. DEMOING ECHO FIRE SOFTWARE. I'M LOOKING FOR FULL MOTION GRAPHICS FOR LOCK-UP WITH MY PRO-TOOLS. GOT A USD AND MACHINE CONTROL.
THANKS,
RON

Re: ADR FOLEY
 

ok if you have an open slot you might look for a used Fuse card.
note the Fuse card will not work w/ OSX if you are planing the change in the near future.
a link to the doc page
http://www.auroravideosys.com/suppor...alsdrivers.php

Re: ADR FOLEY
 

i think you need to go to Pro Tools 6 to get this to work. otherwise, yeah if you are not going to upgrade to OSX, then get a fuse card.

Re: ADR FOLEY
 

Hes fine using the EchoFire extension witht the Sony DV.

Re: ADR FOLEY
 

Thanks for the help.
Ron

Re: ADR FOLEY
 

The 500 MHz G4 is too slow for Echofire/video through firewire. Look for the fuse card or a miro DC30. Miro DC30 is great in OSX as well, but it cannot be used in a G5.

Re: ADR FOLEY
 

Hi to the Netherlands,
1) Thanks for the info.
2) Just by coincidence my son's (Buck McCoy) song has been added to the radio playlist in the Netherlands. I think they are playing "STARTING THEN"...please let me know if you hear it.
Thanks,
Ron