Route Logic Audio Into PT Session?
 

I figured out how to route MIDI in PT MIDI tracks into Logic via the IAC Bus. To complete the circle I need to get Logic's output back into a PT track. Does anyone on here know how to do this? It seems that PT audio tracks will only accept as an input one of the physical inputs that exists on the Digi interface. As a workaround to this, I found and installed an app called SoundFlowerBed which is supposed to be capable of routing audio between applications. I just don't have a handle on how to get it to do this. The virtual channels the SoundFlowerBed app creates don't show up in PT.

Re: Route Logic Audio Into PT Session?
 

you'll need to use physical inputs.

Re: Route Logic Audio Into PT Session?
 

Thanks. Its so weird that amongst all of the abilities of these apps there doesn't exist even one way to route audio between them.

Re: Route Logic Audio Into PT Session?
 

You may be able to use the output of your computer, since it functions as a spidf out, into the spidf (or maybe the adat set to optical) on your PT interface. You may need a special cable, and it would only be 2 channels (you could record things 2 channels at a time until you have everything).

Re: Route Logic Audio Into PT Session?
 

I did a little while back with PT 7.4 and Mainstage and it worked well with my Project Mix.
The drivers allow sharing between Logic and Pro Tools and I just simply patched a set of
1/4" cables back into a pair of inputs. Set your levels and go.