Help! Getting Random Pops while using ADAT/OO2R with PT12.5
3 Attachment(s)
I'm coming from a Mac G5 with PT 7.4 to Windows 10 with PT12.5. I'm getting Random Pops while using ADAT/OO2R.
I'm using a Focusrite ISA428 with Adat Card(Clock) with the 002R. I wasn't having this problem with the old Mac unless somehow the clock got switch to internal on the 002. If I'm recording into the inputs of the 002R directly , I get no pops, but if I go in with the ADAT, I get the Pops. I've replace the ADAT cable, and check the hardware and playback setting. Can't figure it out I've attached screen shots of the problem. Any info would be appreciated! Thank you |
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
002 internal clock i.e. master. Set adat expander to external clock i.e. slave.
|
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Thanks for the reply! EGS
Not sure if this is what you meant, but I set the 002R to internal clock source and left the optical format on ADAT. Restarted the PC and still the same problem. I even tried to set the EXT. on ISA to word clock. With the G5 and the 002 , I just had the clock set to ADAT with no problem |
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Unfortunately you’re running with the legacy ASIO driver which never got the love that the DAE or AAE driver got. It sounds like you’re selecting the external ADAT input as the clock source but the driver may not really be switching.
TRY sending word clock from the 002 to the ISA428 and sync the ISA428 to the word clock input. Leave the 002 clock on internal. The benefit of this is that you can create or open sessions with different sample rates and the ISA428 will sync up automatically. |
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Thanks for the reply Jimmy!
Quote:
Quote:
When I tried to record a audio track through the ISA , I get a signal in the ISA but nothing on the the record armed track in PT. I'm I setting this up right or is there a different way? Thanks for the help |
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Forget about what USED TO work. The 002 does not have wordclock. Connect optical to AND from the ISA (both), & set ISA to ext clock via adat optical (not WC).
|
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Quote:
|
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Quote:
+1 |
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Quote:
|
Re: Help! Getting Random Pops while using ADAT/OO2R with PT12.5
Thanks again!
Quote:
Quote:
If I record using one of the 002R inputs , I don't have a problem, only with a track armed to record with ADAT input. I assume PT12.5 doesn't work with the 002R and external ADAT. The 002R and PT 12.5 is only good by itself. I guess I have to start looking into another interface or the 003R like albee1952 suggested.:mad: |
All times are GMT -7. The time now is 07:27 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com