HUI, Microlynx, & G4

[doug sjostrom]

Can't get em both working. They both work on the stealth port, but neither work on a Keyspan USB - serial dual port adaptor. Anyone know a solid solution? Tried setting em both up on the stealth, Micro 1st Hui 2nd, but no luck, i still think this might work if I could figure out the config of the lynx. Can a lynx pass all midi data to - from a HUI. Other road block is I have a miditranslator II that only has one set of midi i/o.
Thanks for the tips.
DS

[This message has been edited by doug sjostrom (edited January 21, 2001).]

[doug sjostrom]

Bump - anyone?

[doug sjostrom]

So they don't work together. From what I have been told the lynx can't pass midi to the HUI. This appears to be true. Fortunatly I had Midiman miditranslator 2x2 lying around and after some config difficulties got it working with some phone help form Digi (thanks). The trick to config was to set up in OMS and then reboot the machine. Before the reboot everything looked right in PT ans OMS but there was no control. After reboot it all came up and has worked fine.
DS