HELP! Not getting any signal...

[sprawlic]

I am using an 888/24 which is synced to an Apogee UV22.
Everything has been fine until tonight I loaded up a mix an I couldn't get any signal in or out of the 888.
I tried all inputs and tried reconfiguring the hardware/playback engine.

I fear my 888 might be broken or something.
Also, I'm not sure if this matters, but the "Digital" indicator is lit up on all but the first 1/2 input meter, even though in the Hardware configuration I have 1/2 set to digital and the rest to analogue.

I'm stumped.

[mldprod]

You might try reinstalling the digi init.I
had a similar problem with an 882.Cleared it right up.

[DigiTechSupt]

-Reseat the interface cable at both ends, checking for bent and/or broken pins.

-Trash the DigiSetup File from the System Folder>Preferences folder. Empty the Trash and restart the Mac. When you go back into Pro Tools, do so from the Pro Tools Application Icon and not by double clicking on a session. Once Pro Tools is launched, reconfigure the hardware settings.

Brent