Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Software > Tips & Tricks

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-13-2015, 05:31 PM
HMMurdock HMMurdock is offline
Member
 
Join Date: Mar 2015
Location: US
Posts: 2
Default Using a footswitch on a Behringer BCF2000 for Quick Punch

I have been looking around to try and figure out how to use a footswitch to control Quick Punch recording and other transport controls like stop and play.

The BCF2000 is working fine in BHUI mode as per the setup outlined in this very helpful set of YouTube videos:

Behringer BCF2000 Control Surface w/Pro Tools

Behringer BCF2000 with Pro Tools - PART 2

The transport controls work fine when I am controlling directly from the BCF2000 main hardware, but when I plug in a footswitch it doesn't seem to have any effect. Also, there is an LED indicator on the BCF2000 that is supposed to light up when it is activated. The LED did not light up with either cable when the BCF2000 was pulled into Pro Tools session or when "idling" in standalone mode.

The footswitch is a Hosa FSC-384 and I tried both a TS and a TRS 1/4" cable just for good measure even though the specs for both the footswitch and the BCF2000 are pretty clear that the 1/4" jacks are TS for both.

My best guess is that I have to dig around in the BHUI preset and explicitly assign an MMC to the footswitch somehow, but I have little experience with MIDI and I am out of my depth.

Any help anyone can offer would be great.

I am running Pro Tools 11.3.2 on a PC running Windows 10 over an i7 3.4GHz with 8GB of RAM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What interface has a footswitch for auto punch in/out hrocks FireWire and USB Audio Interfaces (Win) 2 12-28-2014 03:35 PM
Footswitch for Punch In? Moontan NYC Third Party Interfaces 4 07-13-2014 09:45 PM
Punch in/out footswitch cjs102460 ProControl, Control|24, Command|8 4 11-14-2010 12:38 PM
quick punch with a footswitch 002r guitarhead 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 15 06-28-2008 06:13 PM
Can you punch in without a footswitch? digi 002? fafaflowley 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 2 07-12-2005 09:20 AM


All times are GMT -7. The time now is 01:25 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com