96i channels 1-4 input sensitivity in PT8 TDM

[Artysan]

Since installing TDM8, all three of my 96i interfaces have incorrect behavior in the Hardware Setup dialog. Channels 1-4, the ones with sliders, actually operate like the slider is upside down. When set to +4 sensiditivity, the channels actually have -12 sensitivity, and vice versa. The other 12 inputs' sensitivity settings operate correctly.

[DigiTechSupt]

I just did a really quick test and I think I see what you're seeing. I'll get this logged and looked into asap...

[Artysan]

Originally Posted by DigiTechSupt

I just did a really quick test and I think I see what you're seeing. I'll get this logged and looked into asap...

I thought I had a work-around figured for this and went into a live recording situation with it. I am now finding distortion on tracks recorded by these inputs even though the record level to track is -20 to -10 or so. Meters did not indicate any problem on any of these tracks during record.

I am starting to think that there is a gain-structure problem internal to the interface on these channels and not simply a reversed control as I had first thought. I need to know what you have found asap.

Thanks,