|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
US2400-should or shouldnt?Control-Can I do better?
It's sad there are no scribble strips but I can deal with using the old fashioned method of tape. I'm more interested in 24 faders in front of me, especially considering I use the C-24 at most studios I work at. This will be at home for a pre-studio-mix setup. The only down side I see aside from the lack of scribble strips is there is no way of manning the automation from the controller.
Any pros or cons considering I can get one for $600. I originally wanted 3 MotorMix2s till I saw the hugh price they carry. Why'd CM Labs prices go so high? Thanks guys for your support!
__________________
Betsy Thomson |
#2
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do better?
Hi,
Where can you get one for $600? Brandon
__________________
Brandon Howlett Vibe Audio Post, Inc. Re-recording Mixer Custom Build CPU, HDX 1, Omni, 192 I/O Digital S6 M10 24 fader Satellite Mac Pro, HDNative, 192 I/0 Black Magic HD Extreme |
#3
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do better?
They can be had anywhere for $699 now and I have a buddy who works at a dealer.
Anyone care to comment on it's ability or lack of?
__________________
Betsy Thomson |
#4
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
Quote:
Mark |
#5
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
Quote:
Pindebraende |
#6
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
That would be great, I haven't seen one up close so I'd be interested to know if it's flimsy of built well to last.
Anyone have any experience with the Mackie Universal with 2 fader pacs? Any new CS's coming out soon in the below 3k price range? That's my top price -3k.
__________________
Betsy Thomson |
#7
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
Well, personally, I've experienced the US2400, and while I'll admit that the fader motors are a little smoother and quieter than a Mackie Control, and the unit is fairly well built... the scribble strip thing is a dealbreaker for me. The faders, for whatever reason, don't have the same resolution as the faders in the Control|24 or the Command|8. Apparently, they're going to come out with some sort of Meterbridge / Scribble Strip add-on for the US2400, but I wouldn't hold my breath.
I've been renting a Command|8 for a while, and for my money, I'd rather have 8 faders that are solid, than 24 faders that suck. Just another guy's $0.02 Cheers, eh? |
#8
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
I have one, and for the money (though I paid a lot more than $699 for mine) I think it's great. Yes it has no scribble strips, but a sharpie and some console tape and I'm good to go. It's got a small footprint too, so it doesn't eat up my whole studio and I can move it out of the way when I'm not using it. My $.02.
-Evan |
#9
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
I'd rather have 8 good faders too as opposed to 24 not so good but I haven't heard many bad things about the Tascam to give a definite no to it. I'd still like to find a Pro-Control but will not say no to the 2400 for now. i don't mind taping the strip.
__________________
Betsy Thomson |
#10
|
|||
|
|||
Re: US2400-should or shouldnt?Control-Can I do bet
the Mackie Control is quite good. It plays well with all software, a lot of nice dedicated buttons. I would bet it's great with the extra faders. I use the C24 at the studio and Mackie Control at home. It works and feels very good. I don't know about the Tascam. The price is right, though.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Waveforms Jitter when they shouldnt!!! | Chompers | Pro Tools TDM Systems (Mac) | 2 | 05-10-2007 09:36 AM |
Tascam us2400 24 channel control surface | cfb25 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 12-10-2006 10:57 AM |
You shouldnt need to be computer smart | ryan mertz | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 28 | 09-20-2006 07:08 AM |
Should I, SHouldnt I??? | Halomobilo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 08-31-2005 05:08 PM |
using tascam us2400 for plugin control | DickHarvey | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 03-31-2005 02:03 AM |