Output from MBOX mini too quiet

[pekaboo]

I played a gig on the weekened which involved me playing my tracks from ableton on my laptop out through my mbox 2 mini into the mixer.

The problem was that the output from my MBox Mini was really low compared to the CDJ's that everyone else was using. I had to turn the gain on the mixer all the way up and have the volume on my MBOX turned all the way up to get it to almost the same volume as the CDJ's which was a bummer because it meant when I came on the volume to the dancefloor was alittle lower than the last person who was playing.

I have a Behringer Hum destroyer connected to the output of my soundcard and had an 1/4inch->RCA adapter on the Right and Left 1/4inch cables coming out of the hum destroyer so I could plug it into the mixer.

How can I get the volume louder coming out of soundcard?

Heres the specs of my laptop btw:

Dell inspiron 1520
Core 2 Duo 2200hz
2gig ram
160gb 7200rpm hard disk
Windows XP pro
Ableton live 6

[pekaboo]

bump

[cducketts]

I have an MBOX 2 PRO (I just got it yesterday). I installed Pro Tools LE 7.3 and everything installed smoothly but my laptop is having trouble recognizing the actual MBOX 2 PRO hardware (interface). I believe a few drivers have been installed incorrectly or aren't working with my system somehow...I'm not sure). I was wondering if you could help me solve this problem. Here is my laptop configuration:

Dell Inspiron 1520
Intel Core 2 Duo T7500, 2.2GHz, 800MHz, 4MB Cache
3GB RAM, DDR2, 667MHz, 2 Dimm
128MB NVIDIA GeForce 8400M
160GB 5400RPM SATA hard drive
Windows XP Professional Service Pack 2
Firewire 1394 (4-pin) port
4 USB ports


I know this is a lot of info but I wanted you to know everything to make things a little easier to help me. Any help would be greatly appreciated. Thanks.