Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources

Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools 9

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-22-2010, 05:15 PM
Calvinc3 Calvinc3 is offline
Join Date: Oct 2009
Posts: 1
Exclamation No sound from XMON cue outputs

I recently upgraded my Pro Tools HD software from version 8 to version 9. I am running Pro Tools HD3 on a Mac Pro with 8 Xeon processors@2.26 GHz, 6 GB of RAM, primary HDD is 600 GB, with two 1 TB drives for recording. I have a D-Command Main Unit with one Fader Module. I am using a 192 I/O as my primary audio interface, with a 96 I/O as my secondary audio interface. I have everything connected just as it is shown in the D- Command manual (XMON main outputs 1 and 5 to the control room speakers, cue outputs 1 and 2 to the recording room monitors, and cue outputs 3 and 4 to the headphone amp). The output from the 96 I/O is routed to the Cue Inputs. When I was using Pro Tools version 8.1, everything was working properly. However, after I upgraded to version 9, I was no longer able to get any sound from the cue outputs. The only change in my studio has been the upgrade to Pro Tools 9.
I also have a Creation Station PC running Pro Tools 8.0.4 through an 003 Factory+ Rack in the same studio. I connected the recording room monitors directly to the main outputs of the 003, and they worked fine. I'm using Pro Co DB 25 to XLR (male and female) and quarter inch TRS for routing audio signals between the 192 I/O, 96 I/O, and the XMON. I've checked all of the cables and everything is working properly. Please help!

Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
L & R or Mon Outputs via hi-end Sound Card ? ChuckLogan 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 08-08-2010 11:43 PM
Xmon Stereo outputs bearease ICON & C|24 2 02-24-2010 07:15 PM
Xmon Outputs 98wildcat ICON & C|24 7 08-19-2007 11:59 AM
Hum at XMON´s mini speakers outputs i.celma ICON & C|24 3 12-01-2006 04:27 PM
No sound from outputs 3 thru 8 paganini12 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 11 01-08-2001 12:05 AM

All times are GMT -7. The time now is 08:55 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com