Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > FireWire and USB Audio Interfaces (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-10-2018, 05:11 AM
Lease13's Avatar
Lease13 Lease13 is offline
Member
 
Join Date: Feb 2018
Location: Australia
Posts: 4
Default Phantom power peaks then drops out Mbox pro

After having done extensive searches I can't find any specific solutions that work...

I have had this issue occur more than once,
I connect my Mbox pro to my computer, get everything going, inputs in, etc. and then turn my phantom power on - my mic (condenser mic, Rode NT1A) volume level peaks twice and then slowly fades out to nothing...

It then won't pick up any sound to record!
I've tried everything.

The same issue has occurred using the Mbox pro with Protools 9 on a Windows computer back in 2011, and also using most recently using a Mbox pro with Garage Band on a MacBook Pro.

I actually had the mic working yesterday ?!, perfectly fine but then it has stopped working again today... very temperamental and frustrating.

Any help would be much appreciated.
I am guessing issues such as these with it being temperamental may indicate issues with the microphone itself? or the cable? or the Mbox?
Reply With Quote
  #2  
Old 02-10-2018, 11:08 AM
albee1952 albee1952 is online now
Member
 
Join Date: May 2004
Location: nashville
Posts: 34,223
Default Re: Phantom power peaks then drops out Mbox pro

The 2 meter spikes are probably not the mic. That's just the voltage coming on and settling in(it would probably act the same with no mic connected). Absolutely try a new mic cable(you should always have a spare, anyway), and try another mic as well(even if you have to borrow one, or take the Rode to a local music store and test on any mixer). Things to consider:
1-The NT1A is a "budget" mic, so don't feel bad if it needs to be replaced.
2-Try a dynamic mic(everyone should have an SM57 on hand anyway) as they will work even if phantom power is dead.
3-You must use an XLR-XLR cable for phantom to work(phantom voltage does not connect to the quarter inch inputs).
4-phantom requires all 3 conductors of the XLR cable, while a dynamic mic may work fine with only pins 2&3 working
5-phantom is easy to test if you have a simple volt meter. set the meter to DC and a scale that covers at least 50 volts and then measure from pin 1 to pin 2, and again from pin 1 to pin 3. You should see the same voltage at both 2&3, and it might not be 48(could be anywhere from 30 to 50).
__________________
HP z820 12 core, 64GB RAM, HD/Native, HD IOx2, PT11HD, UAD Quad, preamps from Vintech, Five Fish Audio, Miktek, Focusrite, Chameleon Labs, Warm Audio and Midas..............................
https://www.facebook.com/search/top/...0sound%20works


The better I drink...the more I mix.....

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mbox Phantom Power - 2? jbmoony 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 06-12-2011 03:01 AM
Mbox + Phantom Power Brubacher 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 3 02-17-2004 01:09 AM
Phantom Power with the Mbox Josh Scanlan 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 2 11-26-2003 07:41 PM
Help!!!To use phantom power on the Mbox.... SonnyD 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 2 09-07-2003 10:48 PM
MBox-Phantom-Power? Ploch Klaus Pro Tools TDM Systems (Mac) 1 04-22-2002 03:12 PM


All times are GMT -7. The time now is 11:05 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com