Avid Pro Audio Community

Fabster · #1 04-20-2005, 04:50 PM

I had ProTools 6.7, Digi 002 rack and Command 8. Everythingwas fine this morning. Until I decided to upgrade to 6.9 vesion. Result: my command 8 doesn't work anymore (is always off line) and digi 002 rack during the opening software is asking me for a v.1.21.v firmware. Where I can find it? Any idea how to make the command 8 work?

Thank you

ProToola' · #2 04-20-2005, 11:06 PM

Fabster,

Open Pro Tools, go to Setups>Peripherals>MIDI controllers>type in Command 8 etc. then click OK.
I had the same problem when I upgraded to ver. 6.9. This is what corrected it. Hope this is the case with you.

Glad to be of help.

ProToola'

DigiTechSupt · #3 04-21-2005, 09:53 AM

Yes, you will need to reenable the Command|8 in Peripherals.

As for the 002 firmware - it's already on your computer. It will 'download' from your computer to the 002, just click 'ok' in the dialog and allow the update to continue.

Fabster · #4 04-21-2005, 06:38 PM

Thanks guys. About the 002 I don't have my computer connected to internet. How can I do?

macr0w · #5 04-21-2005, 07:02 PM

Quote:

Yes, you will need to reenable the Command|8 in Peripherals.

As for the 002 firmware - it's already on your computer. It will 'download' from your computer to the 002, just click 'ok' in the dialog and allow the update to continue.

What he said.

Fabster · #6 04-22-2005, 09:51 AM

Thank you, thank you, thank you. Everything is working fine!

Fabster

xsdata · #7 04-25-2005, 08:51 PM

I had issues with my command 8 when I upgraded to 6.9 as well . What I had to do was tell 6.7 to unistall all the hardware drivers for the command 8 and digi 002 and re-install them from the 6.9 cd.. It wasn't comming up in the list when I just choose un-install 6.7 software only ...