What brings Dolby Audio Bridge to HDX users?

[bsteeve]

Originally Posted by LDS

I tried setting up an IAC bus but couldn't get it to work. I also tried sending the midi directly through physical midi I/O using a cable and a MOTU 4x4... and I tried output LTC via audio into Lockstep, which then converts that LTC audio to MTC. Lockstep received the LTC audio... but I have mixed results with the resulting MTC making it into the renderer. I'll keep fiddling with it and see if it sorts itself out... but even then, MTC isn't frame accurate.

Yep this is not working for me either... had to generate an LTC wav file to get it to sync with the renderer.... but with MTC through IAC Bus 1.. no go, does not work.
Anyone got it working with MTC? What is your magic trick...?
I'm running an HDX2 with an MTRX

[Adam at Dolby]

Have you tried deleting and re-adding the port in Audio MIDI setup. I've had to do that to get this working.

In Audio MIDI setup, MIDI Studio, IAC Driver, IAC Properties, Add and Remove port - delete the existing bus with the minus key, re-add with the plus key so it shows IAC Bus 1 and make sure Device is Online is checked. Go back to Pro Tools, Peripherals, Synchronization and set the Generator to IAC Bus 1.

[Adam at Dolby]

Hi Paolo, Separate issues altogether. Atmos Content Creation Tools are an important but small part of what Dolby Labs does altogether so it is a matter of resources - eng, QA, support and fitting into existing sales/system models. We also believe that our dealers selling configured systems provide added value and services in supporting our products and helping customers with over-all Atmos studio needs.

[Adam at Dolby]

Originally Posted by bsteeve

Yep this is not working for me either... had to generate an LTC wav file to get it to sync with the renderer.... but with MTC through IAC Bus 1.. no go, does not work.
Anyone got it working with MTC? What is your magic trick...?
I'm running an HDX2 with an MTRX

Have you tried deleting and re-adding the port in Audio MIDI setup? I've had to do this to get it to work.

Audio MIDI setup, MIDI studio, IAC Driver, IAC Driver Properties, Add and Remove ports, remove with minus, add with plus, should display IAC Bus 1, make sure Device is online is checked, reselect as MTC Generator in Pro Tools, Peripherals, Synchronization, MTC Gen online in transport window.

Should work.

[ChrisMac]

anyone try the Source Elements LTC plug to send TC? https://source-elements.com/products/source-ltc

[paulo m]

Originally Posted by ChrisMac

anyone try the Source Elements LTC plug to send TC? https://source-elements.com/products/source-ltc

Related:

https://www.pro-tools-expert.com/pro...ent-4682714898

View comments below the article.

[bsteeve]

Originally Posted by Adam at Dolby

Have you tried deleting and re-adding the port in Audio MIDI setup? I've had to do this to get it to work.

Audio MIDI setup, MIDI studio, IAC Driver, IAC Driver Properties, Add and Remove ports, remove with minus, add with plus, should display IAC Bus 1, make sure Device is online is checked, reselect as MTC Generator in Pro Tools, Peripherals, Synchronization, MTC Gen online in transport window.

Should work.

No I haven't, I'll try that when I get back in the studio. Thanks for the advice

[huub]

Routing MTC internally works fine for me using the IAC bus.
Don't forget to go to peripherals to assign mtc to the IAC bus.

Huub

[ChrisMac]

Originally Posted by paulo m

Related:

https://www.pro-tools-expert.com/pro...ent-4682714898

View comments below the article.

Thanks Paulo, have to give it a try

[spoons]

(null)
This is working for me also. Might sound dumb but check the Renderer and PT are set to the same frame rate , that initially caught me out.


Sent from my iPhone using Tapatalk