Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools 11

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-24-2013, 11:34 AM
sares sares is offline
Member
 
Join Date: Nov 2012
Location: medellin
Posts: 11
Default 003 driver problem pt11

My 003 in PT 11 Shows like Asio003 Firewire.

I Need that my 003 shows an operate like they are originally: A Digi003 (without asio in PT.

Help Me!
Reply With Quote
  #2  
Old 06-24-2013, 11:50 AM
Park Seward's Avatar
Park Seward Park Seward is offline
Member
 
Join Date: Jul 2001
Location: Grants Pass, OR
Posts: 4,284
Default Re: 003 driver problem pt11

Can you select the AVID 003 as the audio engine? Did you download the newest 220/003 drivers?

The newest drivers say "Avid" and not "Digi" in the engine dialog.
__________________
Park
The Transfer Lab at Video Park
Analog tape to Pro Tools transfers, 1/4"-2"
http://www.videopark.com
MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays,
Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax.
Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track.
Reply With Quote
  #3  
Old 06-24-2013, 12:17 PM
albee1952's Avatar
albee1952 albee1952 is offline
Member
 
Join Date: May 2004
Location: Norwich, CT
Posts: 39,305
Default Re: 003 driver problem pt11

I think Park is all over this one. Ever since 9, the driver is a separate download and install. Grab the latest driver and things should get better(but you probably still need to open the Setup>Hardware menu and select the 003 as your audio engine). Holding the N key while opening Pro Tools will take you directly to that window.
__________________
HP Z4 workstation, Mbox Studio
https://www.facebook.com/search/top/...0sound%20works


The better I drink, the more I mix

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote
  #4  
Old 06-24-2013, 12:30 PM
sares sares is offline
Member
 
Join Date: Nov 2012
Location: medellin
Posts: 11
Default Re: 003 driver problem pt11

I Have the 9.0.3 driver.

Avid shows to download a 9.07 driver with "support" to PT11

BUT DONT WORK!!! AFTER INSTALL 9.0.7 driver NOT APPEAR THE UPDATE IN MY w7 device manager the driver after install 9.0 7 still appear the 9.0.3


Curiosly the 9.0.3 have a 16mb of size and 9.0.7 have a 8mb of size.
I´m suspect that the new driver are corrupted

Avid:
Reply With Quote
  #5  
Old 06-24-2013, 01:13 PM
Park Seward's Avatar
Park Seward Park Seward is offline
Member
 
Join Date: Jul 2001
Location: Grants Pass, OR
Posts: 4,284
Default Re: 003 driver problem pt11

I guess you are on a PC. The Windows driver is version 9.0.7. Mac is 11.0.0.

http://avid.force.com/pkb/articles/d...02-003-Drivers

I am on a Mac so I don't know about the PC driver version. Perhaps someone else can report on the success or failure of that driver.

When you boot into PT10, does it work there?
__________________
Park
The Transfer Lab at Video Park
Analog tape to Pro Tools transfers, 1/4"-2"
http://www.videopark.com
MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays,
Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax.
Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track.
Reply With Quote
  #6  
Old 06-24-2013, 01:15 PM
sares sares is offline
Member
 
Join Date: Nov 2012
Location: medellin
Posts: 11
Default Re: 003 driver problem pt11

Yes
PT 10.3.6 Work correctly
Reply With Quote
  #7  
Old 07-03-2013, 08:56 AM
mbat4100 mbat4100 is offline
Member
 
Join Date: Dec 2005
Location: Sydney
Posts: 12
Default Re: 003 driver problem pt11

After a week of iLok licensing problems I have just done CPTK crossgrade and now I am having same problem with 003 with upgrade to 10.3.6

Haven't even got to installing the PT11.

Installed latest 002-003 family driver 11.0 and 10.3.6 and now my 003 only acts as an interface.

Like other users this a complete disaster and must be a mistake.

Any advice from Avid please what to do ? Or what will be done about it?

I made enquiries BEFORE I upgraded and was assured the 003 would work. I assumed that meant with PT10 as well as PT11 given that there was nothing wrong with my PT10/003 system until the upgrade. Certainly that was the implication.
Reply With Quote
  #8  
Old 07-03-2013, 09:03 AM
mbat4100 mbat4100 is offline
Member
 
Join Date: Dec 2005
Location: Sydney
Posts: 12
Default Re: 003 driver problem pt11

As a postscript: This can't be a hardware problem as the 003 worked fine with PT10 before the software/driver upgrade .

It is a few lines of code that someone urgently needs to write to fix the problem surely!
Reply With Quote
  #9  
Old 07-03-2013, 09:21 AM
Park Seward's Avatar
Park Seward Park Seward is offline
Member
 
Join Date: Jul 2001
Location: Grants Pass, OR
Posts: 4,284
Default Re: 003 driver problem pt11

Since Avid has said the 003 WILL be supported, a fix should be in the works.

Oh, the new 002/003 drivers have "Avid" in the title and not "Digi". So if it says "Avid 003", that is the new driver.
__________________
Park
The Transfer Lab at Video Park
Analog tape to Pro Tools transfers, 1/4"-2"
http://www.videopark.com
MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays,
Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax.
Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track.

Last edited by Park Seward; 07-03-2013 at 12:47 PM.
Reply With Quote
  #10  
Old 07-03-2013, 09:41 AM
albee1952's Avatar
albee1952 albee1952 is offline
Member
 
Join Date: May 2004
Location: Norwich, CT
Posts: 39,305
Default Re: 003 driver problem pt11

Might be worth posting a Sandra report. My 003 is working fine with 10.3.5, 10.3.6 and 11.01. Could be a FW controller issue or a FW driver issue.
__________________
HP Z4 workstation, Mbox Studio
https://www.facebook.com/search/top/...0sound%20works


The better I drink, the more I mix

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
correct driver version for 003 with PT11.1.2 on OSX 10.8.5 altavek 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 0 03-05-2014 02:14 PM
correct driver version for 003 with PT11 on OSX 10.8.5 altavek FireWire & USB Audio Interfaces (Mac) 0 02-17-2014 11:39 AM
How to start PT11.1 without Audio driver in Win 7? peterle Windows 2 01-01-2014 12:20 PM
003 OSX Driver for PT11/10.3.X Simultaneous Use Arya44 Pro Tools 11 2 10-04-2013 10:31 AM
HD1+192 Core Audio Driver Non-HD PT11? zoundman Pro Tools TDM Systems (Mac) 0 10-23-2011 07:48 PM


All times are GMT -7. The time now is 03:37 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com