Any chance of fixing Digi 003 Win drivers?

[bcwiz]

I know it's a long shot but really. Stop the transport and you have a gap in the audio then part of the reverb tail plays. WT? Audio will often distort briefly when starting or stopping. WT? Does it on half a dozen systems and five different 003R and two 003. Also you roll along hear a 'tick' roll back not there. (yeah and don't start with clocking issues, it's not that) I'm also on clean regulated power and my power amps spec better than some mic pres so it ain't that.
Never did it in PT7 so gotta be the damn drivers. I hear from other people that this started in PT8. I jumped from PT7 to PT10. I love PT10, it's great. I also like my 003R but some days it really bugs me that something like this is ignored and never gets fixed.

end of rant

[albee1952]

Been using the 003 controller here without issue for 3 years and every version since 7.3. Running 10.3.2 HD software now and can't really find a fault with the 003(minor software things, but the hardware is fine). My only complaint re clocking is having to reset on system boot(I use an eternal Word Clock). FWIW, while Avid recommend the Legacy firewire driver, it doesn't work here, but the TI Compliant driver works dandy. Sorry its not serving you

[bcwiz]

Originally Posted by albee1952

Been using the 003 controller here without issue for 3 years and every version since 7.3. Running 10.3.2 HD software now and can't really find a fault with the 003(minor software things, but the hardware is fine). My only complaint re clocking is having to reset on system boot(I use an eternal Word Clock). FWIW, while Avid recommend the Legacy firewire driver, it doesn't work here, but the TI Compliant driver works dandy. Sorry its not serving you

Yeah I know I'm running the same version and I get lots of work done with my 003 and it really is solid apart from those couple quirky things. Everything bounces out fine so I don't worry, It just bugs me every once in a while. (just crabby today ha ha)
You don't experience the dropout when the transport stops? Hmmm

[albee1952]

Originally Posted by bcwiz

Yeah I know I'm running the same version and I get lots of work done with my 003 and it really is solid apart from those couple quirky things. Everything bounces out fine so I don't worry, It just bugs me every once in a while. (just crabby today ha ha)
You don't experience the dropout when the transport stops? Hmmm

No dropouts here. I was getting pops at punch-out points using quick-punch, but that went away sometime around 10.3. Maybe you should post a Sandra report to see if that shows up any hardware issues?
Help us Help You - READ THIS Before Posting!

[bcwiz]

Originally Posted by albee1952

No dropouts here. I was getting pops at punch-out points using quick-punch, but that went away sometime around 10.3. Maybe you should post a Sandra report to see if that shows up any hardware issues?
Help us Help You - READ THIS Before Posting!

Yes well I'd have to post for half a dozen different rigs, Asus, Intel, Lenovo, etc. they all do it (ASIO4all doesn't behave that way)

Now see, I never had the noise with 'quick punch' thing.
Maybe it's time to upgrade to x79 i7 or some such thing. These machines are getting a little long in the tooth.

[albee1952]

Originally Posted by bcwiz

Yes well I'd have to post for half a dozen different rigs, Asus, Intel, Lenovo, etc. they all do it (ASIO4all doesn't behave that way)

Now see, I never had the noise with 'quick punch' thing.
Maybe it's time to upgrade to x79 i7 or some such thing. These machines are getting a little long in the tooth.

Yeah, ASIO4ALL was a bust for me(tried it with Fast Track Pro). Those x79/i7 rigs sure are tempting, but I'll take 1 or 2 solid systems, over 5 or 6 that don't cooperate

[bcwiz]

Originally Posted by albee1952

No dropouts here. I was getting pops at punch-out points using quick-punch, but that went away sometime around 10.3. Maybe you should post a Sandra report to see if that shows up any hardware issues?
Help us Help You - READ THIS Before Posting!

Well here's a Sandra from one of my rigs. I appreciate any advice but I think it's pretty straight forward. This rig ran PT7.3 with 003R for a long time and now runs PTHD 10 very well except for the issues in the OP
SiSoftware Sandra

ID
Host Name : Digi003R


Computer
Model : OEM System Product Name
Serial Number : System Ser**********
Chassis : Desktop
Mainboard : ASUS P5B-E
Serial Number : MB-123*******
BIOS : AMI (OEM) 1601 07/13/2007
Total Memory : 7GB DIMM DDR2

Processors
Processor : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2C 2.13GHz, 2MB L2)
Socket/Slot : FC LGA775

Chipset
Memory Controller : ASUS P5B 4x 267MHz (1GHz), 2x 4GB DIMM DDR2 802MHz 128-bit

Memory Module(s)
Memory Module : Kingston 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : Kingston 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : Kingston 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : Kingston 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)

Video System
Monitor/Panel : Samsung SyncMaster
(1600x1200, 19.1")
Monitor/Panel : Samsung SyncMaster
(1600x1200, 19.1")
Video Adapter : NVIDIA GeForce 8600 GT (4CU 32SP SM4.0 1.19GHz, 512MB DDR3 1.4GHz 128-bit, PCIe 1.00 x16)
Video Adapter : NVIDIA GeForce 8600 GT (4CU 32SP SM4.0 1.19GHz, 512MB DDR3 1.4GHz 128-bit, PCIe 1.00 x16)

Graphics Processor
OpenCL GP Processor : NVIDIA GeForce 8600 GT (32SP 4C 1.19GHz, 512MB DDR3 1.4GHz 128-bit)
Compute Shader Processor : NVIDIA GeForce 8600 GT (32SP 1.19GHz, 512MB DDR3 1.4GHz 128-bit)
CUDA GP Processor : NVIDIA GeForce 8600 GT (32SP 4C 1.19GHz, 512MB DDR3 1.4GHz 128-bit)

Storage Devices
Seagate ST3250310AS (250GB, SATA300, 3.5", 8MB Cache) : 233GB (C:)
Seagate ST3320613AS (320.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) : 298GB (D:)
HL-DT-STDVD-RAM GH22NP21 (ATA66, DVD+-RW, CD-RW, 2MB Cache) : N/A (E:)

Logical Storage Devices
System (C:) : 233GB (NTFS) @ Seagate ST3250310AS (250GB, SATA300, 3.5", 8MB Cache)
Audio (D:) : 298GB (NTFS) @ Seagate ST3320613AS (320.1GB, SATA300, 3.5", 7200rpm, 16MB Cache)
Optical Drive (E:) : N/A @ HL-DT-STDVD-RAM GH22NP21 (ATA66, DVD+-RW, CD-RW, 2MB Cache)

Peripherals
LPC Hub Controller 1 : ASUS P5B
LPC Legacy Controller 1 : Winbond W83627DHG
Disk Controller : ASUS 82801H (ICH8) 4 port SATA Controller
Disk Controller : ASUS 82801H (ICH8) 2 port SATA Controller
Disk Controller : ASUS P5B [JMB363]
USB Controller 1 : ASUS P5B
USB Controller 2 : ASUS P5B
USB Controller 3 : ASUS P5B
USB Controller 4 : ASUS P5B
USB Controller 5 : ASUS P5B
USB Controller 6 : ASUS P5B
USB Controller 7 : ASUS P5B
FireWire/1394 Controller 1 : Avlab Technology XIO2200(A) IEEE-1394a-2000 Controller (PHY/Link)
SMBus/i2c Controller 1 : Intel ICH SMBus

Network Services

Operating System
Windows System : Microsoft Windows 7 Home 6.01.7601 (Service Pack 1)
Platform Compliance : x64

Windows Experience Index
Current System : 5.3