|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Fader is bad? C/24
I have a new C/24 here, Just noticed a bad fader. Or is it? No touch response. When I go into test modes and select Touch, All faders show a T and respond to touch except one. I can only move that fader to a new position VIA the Mix window in PT. This controller is not even 30 days old is this going to be a regular failure. I dumped my DXB200 for this and other reasons but I was replacing faders in that thing three a month. I don't want to be going down this road again. Any one have insight on this fader issue?
|
#2
|
|||
|
|||
Re: Fader is bad? C/24
I think I may just have my Dealer order a second console and replace this whole thing. I just don't want to start off with yet another new console and be replacing parts in less than 10 hours use. Any one have any insight as to the no touch response on one fader? Anyone?
|
#3
|
|||
|
|||
Re: Fader is bad? C/24
I had the same problem. I used re-calibrate in the utility menu and it fixed it.
__________________
Chuck Macak electrowerks recording Mac Pro 3.7 GHz Quad-Core Intel Xeon E5 32gig ram PT HD 12 with D-Command 24 Apogee Ensamble Thunderbolt UAD2 Octo x2 |
#4
|
|||
|
|||
Re: Fader is bad? C/24
Ive recalibrated over and over and the one fader just does not detect "touch resistance change"
|
#5
|
||||
|
||||
Re: Fader is bad? C/24
It sounds like a bad fader. The only way to know for sure would be to swap it's ribbon cable going to the fader motor control with another fader - if the fader still doesn't work, you'll know it's a bad fader. If it DOES work, it's probably the fader motor control.
|
#6
|
|||
|
|||
Re: Fader is bad? C/24
I dont want to use time and effort to have that much down time. Can you please send a fader ASAP so i can do the swap one time. Or I can have My dealer arange for a new console sent out and simply exchange this console. Ither way..
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
10.3 and 10.3.1 Small Volume Fader AND Clip Gain Fader Problem | Ale | macOS | 1 | 10-11-2012 10:07 AM |
Making plugins swap into fader on Presonus fader | bryandugans | Pro Tools 10 | 1 | 04-11-2012 07:57 PM |
Basic Gain Structure Fader/Master Fader Question | acmost | Pro Tools TDM Systems (Mac) | 1 | 05-16-2011 05:36 AM |
FADER MUD - IMPOSSIBLE TO MAKE FADER WRITES IN REAL TIME | Jim Casey | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 04-22-2007 10:34 AM |
'Fader Pack' and ProControl Fader order issue | Ciaran | ProControl, Control|24, Command|8 | 2 | 03-21-2005 11:58 PM |