|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#11
|
||||
|
||||
Re: Setting up Omni Monitor and IO paths help and tips please
You mentioned you're using analog outputs? Is it possible you may be using a digital breakout? Then you'd need to use 1/3/5/7/2/4/6/8 I believe. I'm using the analogue for 7.1 with my OMNI but have not had these issues.
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#12
|
|||
|
|||
Re: Setting up Omni Monitor and IO paths help and tips please
Not sure about the digital breakout. But that might explain the unusual alignment issues. I bought the Omni used and did a factory reset. I am using the DB25 analog out 1-8 connected to my speakers. Without using the Monitor path of the Omni everything lines up when sending signal through but enabling the Monitor path and changing the order to L R C Lfe Lss Rss Lsr Rsr was where things got funky when running signal to each channel. There seemed to be no rhyme or reason as to why or how the misalignment was happening but seeing the 1/3/5/7/2/4/6/8 order you mentioned would definitely explain what we were hearing.
I just got the new Avid Control app working but the "Monitor Control" in that seems to be a MIDI control of a properly Eucon enabled master fader that dims or cuts with a single button press, which while helpful is not exactly the monitor control I was going for. I would be curious to see about disabling a potential digital breakout. Last edited by CygnusX-1Bk2; 12-06-2019 at 12:56 PM. |
#13
|
||||
|
||||
Re: Setting up Omni Monitor and IO paths help and tips please
Look at my Alt to see how I'm doing my 7.1 output with the OMNI
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#14
|
|||
|
|||
Re: Setting up Omni Monitor and IO paths help and tips please
That is not dissimilar to what I've got. Main differences are my Omni is the 3rd interface in the list, you are going out digitally and I'm analog, My Monitor Main out is set to 7.1 and Alt is LCR to your flipped version.
When the Monitor is enabled and I run a signal generator on a mono track the Left channel is aligned. When I move the surround panner to the C position the signal comes out of the Lss speaker. When the surround panner is set to the R position the signal comes out of the C speaker. With the panner at Rss the signal comes from the R speaker. With the panner at Lss the signal comes from the Rss speaker. Both rear channels also align correctly. Again this is only with the Monitor active. Once I remove the Monitor from the Omni (select None for Main and Alt) the Output labels in the Main Hardware tab change from "Monitor" 1-8 to "Analog" 1-8, the Monitor path is no longer in the IO Bus or Output sections and I activate the 7.1 path using the analog outs everything aligns. Thanks for your input Ryan! (Sorry my screenshots aren't edited...) |
#15
|
|||
|
|||
Re: Setting up Omni Monitor and IO paths help and tips please
I updated my support ticket with the above outline and procedure and got this response:
"Hi Jim, Thanks for the additional info. The instructions have been noted and the case has been associated with the bug (PT-257451). We generally close the case after the case has been associated, but please rest assure you will be notified once a fix is released in a future update. If you have any separate or new concerns, please feel free to contact us or submit a new case. Have a good one! Best, Jeremy Avid Customer Care | Audio Post & Pro" So it's a known bug. |
#16
|
||||
|
||||
Re: Setting up Omni Monitor and IO paths help and tips please
"has been associated with the bug (PT-257451)"
Robo-Tech-Relay well yea. Maytag
__________________
(Help us Help You)<<<click here Profile-System Tracks: https://www.n1m.com/datatunesdetroit Apple Music https://music.apple.com/us/search?term=DatatunesDetroit |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stereo HD Native Low Latency monitor paths are a no go with active surround paths? | vieris | Pro Tools 12 | 3 | 07-27-2015 06:07 PM |
PT 10.3.7 HD error setting up O/I Paths Bus 127-128 | apetit | Pro Tools 10 | 8 | 08-18-2014 05:14 AM |
Stalls on startup - Setting up I/O paths... | jakorsme | Windows | 46 | 08-05-2014 09:37 AM |
Pro Tools 10.3.8 hangs at "Setting up I/O paths... Analog 1-2" [RESOLVED] | spmusik | Pro Tools 10 | 15 | 06-03-2014 07:22 PM |
Pro Tools Crashes on Startup During "Setting Up I/O Paths" | ChrisIQ | Pro Tools 10 | 3 | 08-24-2013 05:27 PM |