pt III please help

[jamkerat]

can i use two i/o cards with one dsp farm
in a g3 300 and how ??????
thanks micha

[jamkerat]

thanks for yuor mail brain!
i want to use two i/O cards from a
pro tools3 system to have more tracks
i think scsi controller is on card?
slot one: i/o
slot two: I/o
slot three :dsp farm
882 /888 (16bit)
and all in a g3 300 tower (beige)
i have a chance??
best wishes michael

[BDWillis]

michael - I'm not familiar with PTIII hardware (had a 442/SysAxe system, then jumped to a MIXplus), so I'm sorry to be of little help. A search under PT Troubleshooting may give you the answer.

Warmest Regards,
Brian

[KristoK]

I had problems setting up my PTIII system into 9600. there was a incomptability issue with second DSP farm that was a little bit newer than the other one. And at some point in the process of finding out a reason of my problem I had just one DSP and two I-o´s inside my machine and as I recall it did work. You just end up with very little dsp-power for plugins and stuff but you will have 32 track recording system
You should be aware of this PCI pachmaker chip rev. issue aswell. Check it out for G3 comtability.
And don´t connect your audio interface to DSP farm as it will also use dsp power from it. Use your i-o cards.

I hope this helps

Kristo

[jamkerat]

thanks to all how helped me!!!!

it works yeah
slot o the older disk io
slot 1 the newer
and the dsp farm
delete all pref s digi init dae
start again and make a new session!!!!
after making a new session i had anew
playback engine and 32 tracks
greattings michael