|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
PT 10.3.10 on Win7 + UAD-2 problems
Hi all--
I've been experiencing PT issues using UAD2 plugs (and UAD1 before that). Mainly it's the "r6025 Pure Virtual Function Call" and "PT could not save/exit because while translating tracks" issues I've seen referenced in other threads. System is totally stable if I'm tracking without effects, or if I'm mixing using plugins included with PT. System is also totally stable mixing in Reaper or Sonar with UAD plugs Interface is an RME FF800. Problem has persisted through all RME driver versions I've attempted. Am running current driver as of last Thursday. Launching PT with the "Run As Administrator" command seemed to help, but not tremendously (I'm both right clicking the program shortcut and selecting Run As Admin, and have "Run This Program As an Administrator" checked in the compatibility mode section of the shortcut's properties. Problem has persisted in PT versions 10.3.2, 10.3.7, and 10.3.10. Trashing prefs has been of no help. Problem has persisted through all UAD driver versions I've attempted (currently at 8.4.0), and existed when I was using UAD1 cards. "CPU optimization" and "use host setting" in UAD config are both unchecked. I've been able to limp along just fine (sometimes crashes never happen, sometimes it's after 4 or 5 hours), but I'm trying to mix a project where crashes happen every launch, within a few minutes, and require a reboot to resolve, so the situation's finally motivated me to ask for help. Please help. TIA. Sandra report follows. SiSoftware Sandra ID Host Name : OctalStudio Workgroup : NFV Computer Model : HP xw8600 Workstation 103C_53335X Serial Number : 2UA91***** Chassis : HP Mini Tower Mainboard : HP 0A98h Serial Number : 2UA91***** BIOS : HP 786F5 v01.36 10/25/2010 Total Memory : 16GB DDR2 FB-DIMM Processors Processor : Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (4C 2GHz, 2x 6MB L2) Processor : Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (4C 2GHz, 2x 6MB L2) Socket/Slot : FC-LGA6 Chipset Memory Controller : HP 5400B Chipset Memory Controller Hub 4x 333MHz (1.33GHz), 4x 2GB DDR2 FB-DIMM 666MHz 256-bit Memory Module(s) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750EZ4-CE65 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750EZ4-CE65 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Samsung M395T5750GZ4-CE66 1GB ECC DDR2 FB-DIMM PC2-5300FB DDR2-666 (5-5-5-15 3-20-5-3) Video System Monitor/Panel : GEM GL-715A (1856x1392, 15.2") Monitor/Panel : ViewSonic VX2235wm (1680x1050, 22.0") Video Adapter : NVIDIA Quadro FX 1700 (4CU 32SP SM4.0 918MHz, 512MB DDR2 798MHz 128-bit, PCIe 2.00 x16) Video Adapter : NVIDIA Quadro FX 1700 (4CU 32SP SM4.0 918MHz, 512MB DDR2 798MHz 128-bit, PCIe 2.00 x16) Graphics Processor OpenCL GP Processor : NVIDIA Quadro FX 1700 (32SP 4C 918MHz, 512MB DDR2 798MHz 128-bit) Compute Shader Processor : NVIDIA Quadro FX 1700 (32SP 4C 918MHz, 512MB DDR2 798MHz 128-bit) Storage Devices WDC WD5000AAKS-60A7B0 (500.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) : 466GB (C:) WDC WD5000AAKS-60A7B2 (500.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) : 466GB (D:) MAXTOR STM3200820AS (200GB, SATA150, 3.5", 8MB Cache) : 186GB (F:) Seagate ST2000DM001-9YN164 (2TB, USB2/SATA300/600, 3.5", 7200rpm) : 2TB (G:) TSSTcorp CDDVDW TS-H653Z (SATA150, DVD+-RW, CD-RW, 2MB Cache) : N/A (E:) Logical Storage Devices System : 200MB (NTFS, 4kB) @ WDC WD5000AAKS-60A7B0 (500.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) New Volume (D:) : 466GB (NTFS, 4kB) @ WDC WD5000AAKS-60A7B2 (500.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) Audio Old (F:) : 186GB (NTFS, 4kB) @ MAXTOR STM3200820AS (200GB, SATA150, 3.5", 8MB Cache) HD-LBU3 (G:) : 2TB (NTFS, 4kB) @ Seagate ST2000DM001-9YN164 (2TB, USB2/SATA300/600, 3.5", 7200rpm) Windows (C:) : 466GB (NTFS, 4kB) @ WDC WD5000AAKS-60A7B0 (500.1GB, SATA300, 3.5", 7200rpm, 16MB Cache) Optical Drive (E:) : N/A @ TSSTcorp CDDVDW TS-H653Z (SATA150, DVD+-RW, CD-RW, 2MB Cache) Peripherals LPC Hub Controller 1 : HP 631xESB/6321ESB/3100 LPC Interface Controller LPC Legacy Controller 1 : SMSC SCH5317-B Audio Device : HP Enterprise Southbridge High Definition Audio Audio Codec : Realtek Semi 262 High Definition Audio Audio Device : 6656 Universal Audio UAD-2 Solo Serial Port(s) : 1 Disk Controller : HP 631xESB/6321ESB/3100 Ultra ATA Storage Controller Disk Controller : HP Enterprise Southbridge SATA cc=RAID Disk Controller : HP SAS 3000 series, 8-port with 1068 -StorPort USB Controller 1 : HP 631xESB/6321ESB/3100 Chipset USB Universal Host Controller #1 USB Controller 2 : HP 631xESB/6321ESB/3100 Chipset USB Universal Host Controller #2 USB Controller 3 : HP 631xESB/6321ESB/3100 Chipset USB Universal Host Controller #3 USB Controller 4 : HP 631xESB/6321ESB/3100 Chipset USB Universal Host Controller #4 USB Controller 5 : HP 631xESB/6321ESB/3100 Chipset USB2 Enhanced Host Controller FireWire/1394 Controller 1 : HP TSB43AB22 1394a-2000 OHCI PHY/Link-Layer Controller SMBus/i2c Controller 1 : Intel 5X00/7X00/8X00 XMB Ch 21-0 SMBus SMBus/i2c Controller 2 : Intel 5X00/7X00/8X00 XMB Ch 21-1 SMBus SMBus/i2c Controller 3 : Intel 5X00/7X00/8X00 XMB Ch 21-0 SMBus SMBus/i2c Controller 4 : Intel 5X00/7X00/8X00 XMB Ch 21-1 SMBus SMBus/i2c Controller 5 : Intel 5X00/7X00/8X00 XMB Ch 22-0 SMBus SMBus/i2c Controller 6 : Intel 5X00/7X00/8X00 XMB Ch 22-1 SMBus SMBus/i2c Controller 7 : Intel 5X00/7X00/8X00 XMB Ch 22-0 SMBus SMBus/i2c Controller 8 : Intel 5X00/7X00/8X00 XMB Ch 22-1 SMBus SMBus/i2c Controller 9 : Intel ICH SMBus Printers and Faxes Printer : Microsoft XPS Document Writer (600x600, Colour) Fax : Microsoft Shared Fax Driver (200x200) Printer : Brother HL-5370DW (1200x1200) Network Services Network Adapter : Broadcom NetXtreme Gigabit Ethernet (Ethernet, 100Mbps) Network Adapter : Broadcom NetXtreme Gigabit Ethernet #2 (Ethernet) Operating System Windows System : Microsoft Windows 7 Ultimate 6.01.7601 (Service Pack 1) Platform Compliance : x64 |
#2
|
|||
|
|||
Re: PT 10.3.10 on Win7 + UAD-2 problems
Keepin' on keepin' on....
Today's error messages on a totally different project were: the "could not save because while translating tracks" message I've been getting, followed by: Blumlien made inactive because Access Violation Occurred and then "could not complete the exit command because Privileged Instruction executed in user mode" (yes, PT was launched as admin) The Access Violation error made this weird mixer view happen: |
#3
|
||||
|
||||
Re: PT 10.3.10 on Win7 + UAD-2 problems
Hi...
oh man ive seen this a few times ...but to be honest i didnt remember how i solved it :-( ..!! But for start this things come to mind : 1. Update pace interlock manager and driver 2. Unistall/Reinstall UAD software 3. Delete the wavecache audio file that is storage along with PT session file 4. Trash PT pref and databases 5. Update your chipset drivers If i remember exactly what i did ill let you know ..!! Meanwhile try that if you didnt yet ! BTW IN MY CASE ive never used the RUN AS ADMINISTRATOR tweak . IN MY CASE ive seen PT doing strange things with it checked :-/ .
__________________
Mac M1 Studio Ultra - Sonoma Beta OS Avid Carbon Interface Protools Ultimate |
#4
|
|||
|
|||
PT 10.3.10 on Win7 + UAD-2 problems
Quote:
In this instance where you've seen issues, I am curious, is your account in Windows already an administrator account? What would the primary issues be? |
#5
|
||||
|
||||
Re: PT 10.3.10 on Win7 + UAD-2 problems
Well yes thats a point ...all my PC i run as administrator ! As is for recording nothing more !
__________________
Mac M1 Studio Ultra - Sonoma Beta OS Avid Carbon Interface Protools Ultimate |
#6
|
||||
|
||||
Re: PT 10.3.10 on Win7 + UAD-2 problems
How do you have 16gb of ram but only 8-1Gb sticks ?
Is the HP FW controller compatible with the RME? Does it give you errors when you run off ASIO? It's a solo so it's not really that much DSP, how many plugs are you trying to run?
__________________
Daniel HDX - PT12.5.1 - HD I/O 16x8x8 Win10-Pro (v1709)- 6 Core i7-6850k - ASUS X99 Deluxe ii D-Command Main Unit - 'Ole Blue http://www.sknoteaudio.com/ plugins rock and are affordable. |
#7
|
||||
|
||||
Re: PT 10.3.10 on Win7 + UAD-2 problems
That's a pretty obscure chipset. Is it even compatible with Pro Tools? I run a UAD2 Quad card here and it works dandy(other than the latency that prevents me from tracking with any UAD plugins)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#8
|
||||
|
||||
Re: PT 10.3.10 on Win7 + UAD-2 problems
"Memory Controller : HP 5400B Chipset Memory Controller Hub 4x 333MHz (1.33GHz), 4x 2GB DDR2 FB-DIMM 666MHz 256-bit"
Here's the other 8. Very strange.
__________________
Take your projects to the next level with a non-union national read at reasonable rates Demos: brucehayward dot com SonoBus Source-Connect: brucehayward Options for Remote Direction |
#9
|
|||
|
|||
Re: PT 10.3.10 on Win7 + UAD-2 problems
Quote:
As for plug count, probably about 6 or 7 total in the project that was causing the grief. There are actually two solo cards in the system, but I'm never using more than 80% load on the UADs. In this project, it's probably at about 15-20% load. |
#10
|
|||
|
|||
Re: PT 10.3.10 on Win7 + UAD-2 problems
Quote:
It's pretty much rock solid in PT if I don't use any UAD plugs. I actually don't think it's ever crashed when tracking or mixing with stock plugs. I've gone to 20 inputs live on actual sessions, but also tested pretty heavily with all 28 inputs the RME is capable of. No issues until the UAD gets involved. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Win7 SP1 / PT 10.3.2 Install Problems | Hendrik XIX | Windows | 2 | 02-18-2013 06:15 AM |
Installation problems - win7 | danny1990 | Pro Tools SE and Essential (Win) | 0 | 08-07-2010 11:37 AM |
pro tools LE 8.0.3 problems with win7 | kevin masl | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 6 | 01-25-2010 04:36 PM |
pro tools LE 8.0.3 problems with win7 | kevin masl | Pro Tools M-Powered (Win) | 2 | 01-25-2010 12:29 PM |
PT8 Win7 problems | St.BeesJevans | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 3 | 11-15-2009 12:50 PM |