Pro Tools 10 HD Native Input Monitoring Glitch

[Asar]

i noticed when i have the green "i" highlighted on a record track, but not actually recording, only sometimes it will play my mic signal through it. it seems like after i been in the session for about 10-15 mins my mic signal will come through without recording, which is what I'm used to. anyone else having this issue? i toggle back and forth with the "set record tracks to input only" and "auto input" options but its the same glitch of not working at times. please look into this and fix it avid. thanks!

[Asar]

issue still exists in 10.1.2 of pro tools hd. this is when using low latency mode and on a hd native card.

[Asar]

issue still exists in 10.1.3

[BobbyDazzler]

Just out of interest, are you using Low Latency Monitoring?

[Asar]

Originally Posted by BobbyDazzler

Just out of interest, are you using Low Latency Monitoring?

Yes

[Asar]

Please look into this Avid. Driving me crazy.

[Carl Lie]

Did you check the cable?

C

[BobbyDazzler]

Are you using hardware inserts on any tracks feeding to the nominated LLM pair? or do you have any plugins on a master track feeding the LLM pair?
Is the Input Monitored track feeding a bus?
All of these scenarios are affecting the way LLM works for me.

[stationwest615]

this problem occurs to me as well. I am on PTX with the Native Card. When low latency monitoring is ON input monitor does not work. BOOOOOOOOooooooo

I seem to have figured out a work around though...

if i go to Hardware settings and change the buffer size to a smaller setting, when i retry input monitoring, it works. Even if i then change the buffer size BACK to what it was before. Not sure why.

Avid please fix this! My 002 runs smoother better than PTX!!!! why did i pay the high price for a crap product?

[Labroue]

Hi,

I have the same problem with the Digi003, and PT10 CPTK (+ low latency input monitoring mode).

In order to work in good conditions, I found a solution. I place in the virtual console a first input channel (this is very important that it be first); I always switches the input monitoring (light green) on this first empty track.

I do not use this first track, it only allows the system to work.

Avid Please, fix this bug.

Thank you; best regards.