|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Protools and Profire 2626 issue
I'm brand new to Pro Tools and I was recently given Pro Tools 10.0 and promptly upgraded to 10.3.10. I was also given the M-Audio Profire 2626 interface. Pro Tools is installed under 64 bit Windows 10 and using the 64 bit Windows 8.1 driver for the Profire because there isn't one for Windows 10. A Roland A30 keyboard controller is sending MIDI via a USB 2.0 MIDI interface. When I open a session and click Setup/Periphals, I select the MIDI Controllers tab, then HUI the Type, Profire MIDI to Receive from but I'm not sure how to set Send to. Actually, I'm not sure if even that is the correct setup. I've tried sending to USB 2.0 MIDI, Expand!, and Profire MIDI but nothing is working. I get a message that says "Pro Tools is unable to communicate with HUI. Power-cycle HUI and check its connections. Note, if HUI is not in use, update the Peripherals dialog to prevent further warnings." Everything seems to work fine in my old sequencer/DAW program. Help!!
Dell XPS8500 w/Intel i5, 8 gigs RAM, 64 bit Windows 10, Roland A30 keyboard controller, M-Audio Profire 2626, Pro Tools 10.3.10 Last edited by wekoenig3; 05-17-2017 at 04:10 PM. Reason: Additional information |
#2
|
||||
|
||||
Re: Protools and Profire 2626 issue
Windows10 is not supported with PT10. You should know one thing: protools is much more demanding with regards to system optimizing. So other daws may work fine, while PT doesn't.
Start here: Help Us Help You Important info on compatibility, optimization and troubleshooting. |
#3
|
|||
|
|||
Re: Protools and Profire 2626 issue
HUI is for controllers with faders like the original Mackie HUI or the new Behringer controller. The midi for the keyboard and the Profire's midi ports is set under midi in the pull down, not preferences.
__________________
Gigabyte z390 Designare I9 990K 4.7 GHz 64 Gb of DDR4 3200 Gigabyte RX580 8 Gb Win 10 Pro 15" Mid-2015 MBP 2.2 GHz i7 16 Gb RAM 512 Gb Flash Drive - OS X 10.14.6 |
#4
|
|||
|
|||
Re: Protools and Profire 2626 issue
Hello and thanks for the responses. I was looking at the problem too much like a musician (which I am part-time) wondering why he's not getting any sound out his gear. Once I started looking at it as an audio engineer (which I am full-time) and had Pro tools route everything to the appropriate busses on the Profire, I was able to record MIDI. I did it twice but I'm going to continue to putz with it to make certain I got it.
Dell XPS8500 w/Intel i5, 8 gigs RAM, 64 bit Windows 10, Roland A30 keyboard controller, M-Audio Profire 2626, Pro Tools 10.3.10 |
#5
|
||||
|
||||
Re: Protools and Profire 2626 issue
On Windows, midi keyboards need to be setup under the Setup>Midi>Midi Studio section. Create a new "instrument" and name it whatever you like. The Brand and Model sections are optional(don't worry if your keyboard is not listed). The Input Port is the crucial detail and needs to be set for whatever way your midi is coming into your system. If the keyboard had a USB connection, it would likely show up as an option like "keyboardUSB[Emulated]". If you are using the midi input of the 2626, then look for something like "ProFireMidiIn". Its usually pretty obvious If the A30 is a controller-only(has no internal sounds) then you don't need to have a midi output path(so I would de-select all 16 midi channels for midi out)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Profire 2626 Latency Issue | gjohung | Pro Tools 10 | 4 | 04-17-2016 09:28 PM |
Wordclock Issue - Profire 2626 | Siegfried Meier | Pro Tools M-Powered (Mac) | 24 | 03-10-2011 07:35 PM |
Mpowered 8.1, profire 2626, Clock issue | nickomatiz | Pro Tools M-Powered (Mac) | 2 | 09-23-2010 02:20 AM |
Profire 2626 Issue | gjohung | Pro Tools M-Powered (Win) | 15 | 05-31-2010 08:40 AM |
Profire 2626 routing issue | boabyd23 | Pro Tools M-Powered (Mac) | 0 | 05-03-2010 02:27 AM |