dae error 9094 killing me softly

[ronan73]

help please
i am using an i book 933 mhz with protools le 6.2.3 and reason as rewire
every few minutes i get the message system held interrupts fot too long 9094 error try increasing you buffer size
my buffer size is set to 1024 which is the maximum and i tryed working from a firewire external disc but it doesnt help

any one any ideas would be greatly apprecciated

[Jace Everett]

Are you going plug-in or edit crazy?

It is a 933mHz iBook. That will, unfortunately, limit your horsepower.

What's your session look like? Track count, plug count, edit density, etc..

Good luck man.

J

[Slim Shady]

Sounds like a CPU issue, you're probably just trying to do too much with a limited system. Running Reason and PT at the same time will eat up most of your 933mhz - I have a 1ghz G4 powerbook and I can't really do very much with my machine if I'm rewiring Reason to PT. For that reason (no pun intended), I suggest that if you need to use Reason for something, do it quickly - in other words, write the part you want in Reason, and record it to audio in PT as soon as it's done and then quit Reason so that you can get your CPU power back.

BTW, I have had much more success with Reason and Logic than with PT - I guess Logic isn't as big a CPU monster as PT, so I tend to do all my Reason programming with Logic first, then switch to PT for editing and mixing.

[ronan73]

hey there thanks for the answers i am not sure my reply came through cause i dont see it on the thread
it looks like i have made a mistake between the buffer size for protools and the one for the m box and now that ive changed the one in m box which was actually on 526 it works fine. i havent worked alot with reason but the little i did i encountred no problems
thanks again bye

[JCBigler]

Hey Man,

Can you elaborate on what you did to resolve this problem? I'm having similar problems in Win XP.

You said something about the H/W buffers for Protools and the MBox not matching?