Hooking up 3 192s

[Mutley Eugenius]

Here's a toughie:

I have a Sync HD

I have 3 192 UNITS, AB&C, Only 2 (A&B) are accessible to Pro Tools (because B is piggy backed onto A)

I have an HD Core card, HD Accel card, and an HD Process card.

I have an XLogic Delta Link Madi-HD translator and I have an optical MADI line coming from the upstairs concert hall bringing me huge quantities of channels from the MONDO Digico system that we have up there

The HD Core Card is plugged into the 192 A primary in, and the expansion port connects to 192 B. I know you can only have 2 192s on one HD Core card.

The HD Accel card plugs into the XLogic Delta Link Madi-HD Primary B connector. The HD Process card plugs into the XLogic Delta Link Madi-HD Primary A connector. Nothing plugs into the 192 C. How should the 192C be connected in order to work as I/O for Pro Tools? There are no more jacks to plug into (I can't piggy back it onto 192 B)

Any takers for that one?

[Craig F]

a) another HD card for 192C
b) upgrade to a HDX2
c1) how are the 192s loaded and used?
c2) could 2 HD I/Os replace the 3 192s?
d) a MADI router and some other MADI to analog or digital I/O box(s)

[Mutley Eugenius]

Interesting answer.

The HD Accel card plugs into the XLogic Delta Link Madi-HD Primary B connector.
The HD Process card plugs into the XLogic Delta Link Madi-HD Primary A connector.

Is it normal to have 2 cards to talk to une unit? I want to know if I can have only one card link to the XLogic Delta Link Madi-HD and then use the other card for the 3rd 192

[Craig F]

I have used the Delta Link and it connects to 2 HD card.

I don't know about half connecting the Delta Link, try e-mailing SSL and asking if it is posable to only connect half