Pro Tools 7.4cs1 Updates for all 7.4 Systems

[Avid]

Available for download from the Pro Tools CS Updates page:
www.digidesign.com/support/csupdates

Pro Tools 7.4cs1 includes fixes for all Digidesign control surfaces on all platforms (HD, LE, M-Powered):

Fixed: Pro Tools quits unexpectedly when moving a plug-in window while closing it from a control surface (Item #99442)
- If a plug-in window was closed from a control surface while the plug-in window was being dragged across the screen, Pro Tools would quit unexpectedly.

Pro Tools LE and M-Powered owners that are not using a control surface with Pro Tools can skip this update.

Pro Tools HD 7.4cs1 also includes the following:
Fixed: When Transport = Machine and a linear deck is connected, Back and Play does not work (Item #99342)
- Under certain conditions the Back and Play command would not respond when transport was set to Transport = Machine.

Pro Tools HD owners that are not using a control surface with Pro Tools or MachineControl with a linear deck can skip this update.

Previous installation of Pro Tools 7.4 required to use these updates:

• Pro Tools HD 7.4cs1 for Mac OS X
• Pro Tools HD 7.4cs1 for Windows XP
• Pro Tools LE 7.4cs1 for Mac OS X
• Pro Tools LE 7.4cs1 for Windows
• Pro Tools M-Powered 7.4cs1 for Mac OS X
• Pro Tools M-Powered 7.4cs1 for Windows

New D-Control Features
Pro Tools HD 7.4cs1 also includes controller personality file and firmware updates for D-Control worksurfaces. These personality and firmware updates include the following new or updated features:

• Changes to the "Auto Write To" Switches
• Changes to the Soft Keys Section
• Dual Transport Mode
• LED Test Mode Color Changes (D-Control ES Only)
• D-Control Multi-Mode (Mac only)*

*Pro Tools HD 7.4cs1 for Mac OS X adds the ability to enter D-Control Multi-mode, which lets you use a single D-Control console to access up to four Pro Tools|HD systems on a network. Multi-mode lets you quickly switch worksurface control from one Pro Tools system to another by pressing a single switch on the D-Control console. Please note that older consoles may require upgraded components to support Multi-mode. See the D-Control Addendum v7.4-7.4cs1 for more information.

For more about the new D-Control features, see the D-Control Addendum v7.4-7.4cs1 document avaliable from the Pro Tools HD 7.4cs1 pages.