|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
E3 Engine I/O and Network Switch Connection Error
ok - so it looks like there is something wrong with my E3 Engine.
I made the update to 4.5 - and i got the error every once a while that says the above - E3 Engine I/O and Network Switch connection error. So i disassemble the HDX Card and had a look if i loose a cable or something as i put the additional RAM in - but it was all tighten and nothing was loose. So i put the HDX Card in and it seems like that the error is gone - but not shure. So - i am curious if this has happened before to somebody else? And of course i fear that if i am on the road and the engine get a little shaked - it will occur again. Any Tips - any help? |
#2
|
||||
|
||||
Re: E3 Engine I/O and Networ Switch Connection Error
Did this error happen during the first run after updating the system? We recommend to power-cycle all devices after the firmware updates are complete; maybe this step was missed?
Otherwise, please let the unit run overnight if possible and let us know if the error returns. Thanks, -MikeZ
__________________
Avid Live Sound Support |
#3
|
|||
|
|||
Re: E3 Engine I/O and Networ Switch Connection Error
Of course i did a restart -a couple of times!
I will run it overnight and see if it occurs again. |
#4
|
|||
|
|||
Re: E3 Engine I/O and Network Switch Connection Error
This is a Foto of the error message.
https://www.dropbox.com/s/mf31wnnq2i...20754.jpg?dl=0 |
#5
|
|||
|
|||
Re: E3 Engine I/O and Network Switch Connection Error
Ok, i can reproduce this behaviour:
If i change the IP in the Venue Software from Manual to DHCP i get the connection Error and also loose the surface. Error comes and goes till i restart the System and dont change anything. Workaround: dont touch it! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Connection to the video engine has broken... | NUBEE | Pro Tools 11 | 2 | 12-16-2014 02:01 PM |
allow incoming network connection dialogue shakes my nerves in Pro Tools 11 | Franco1967 | Pro Tools 11 | 46 | 12-23-2013 02:38 PM |
Buy a decent network switch... | BasketCase | Artist Series | 2 | 08-16-2013 02:16 AM |
Icon Locks up on Network connection | roberts | ICON & C|24 | 0 | 04-25-2012 10:52 PM |