Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-19-2005, 01:28 PM
jgossman jgossman is offline
Member
 
Join Date: Apr 2005
Posts: 7
Default 192 output card not being recognized

Has anyone ever had a problem with a 192's output card not being recognized in the Hardware Setup / IO Setup? We recently installed an additional 192 (eBay purchase) into a rig and the interface's Input card is being recognized in both of these setup pages, but not the output card. This is not in the expansion slot, but in the dedicated output card position. I popped it open to check the ribbon cable - it looked fine, but I reseated it just to be sure. At the end of the session today, I'll probably end up pulling one of my other cards and putting it into the new interface just to confirm it works before I assume the worst (bad card / something in the interface). This can't be software related, can it? I don't think so, but you never know.....



Pro Tools HD 2
3x 192
SYNC I/O
Pro Tools 6.7cs8
Macintosh G5 Dual 2 Gig
2 Gigs RAM
LaCie 250 Gig Firewire Drives
ATTO SCSI 128
Glyph Trip
Reply With Quote
  #2  
Old 04-19-2005, 02:31 PM
Richard Barrie Richard Barrie is offline
Member
 
Join Date: Jan 1999
Location: London, U.K.
Posts: 199
Default Re: 192 output card not being recognized

I have seen failures where the card is just not recognised. Had to return cards to Digidesign for replacement.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No Output Hardware recognized in I/O BrianJArmstrong macOS 1 07-17-2012 11:31 PM
HD3 3rd card not recognized dhumez Pro Tools TDM Systems (Mac) 12 12-29-2011 01:09 PM
192 not recognized from Core card, but IS from Accel Card. Advice? Mt.Everest Pro Tools TDM Systems (Mac) 5 05-24-2010 09:14 PM
DSP Farm card not recognized in OSX??? soundboy35 Pro Tools TDM Systems (Mac) 13 01-27-2004 02:24 PM
002 not recognized by G4 as sound output option soundminded 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 1 10-13-2003 03:35 AM


All times are GMT -7. The time now is 09:09 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com