|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Euphonix Mc Control and PT9
Dear colleagues, i kindly seek your help!
I bought a MC Control surface which, in my dreams, was perfect, but it was a very bitter first-day run: 0) i have a new iMac 27' core i7 10.6.6 i have LATEST euphonic software 2.5.7 1) i was able to connect the MC Control to the network, had some problem with DHCP mode but in manual address mode it got connected 2) the finder is controlled without problems, and macros and keyboard combinations works very well. also application switching and many more less useful functions for music:) --- this means that the network is connected, at least for controller ----> computer --- all this functions that are working implies no feedback to the device (like moving fader or light-up of buttons---- the tragedy is: 3) if i use for example a FADER to control in volume pro tools 9.0.1 or logic 9.3.1happens ALWAYS the following behavior: 3a) the volume in the DAW is changing accordingly to my fader movement 3b) the volume level in the Controller Display is NOT changing 3c) after i release the touch control of the fader, since the internal state of fader is not changed (the volume label in the mc control is not changed) THE FADER IS PUSHED BACK IN THE OLD POSITION AUTOMATICALLY 3d) THE UNIT GOES OFFLINE and gets back to the "Welcome to artists series..etc.." 3e) at this point is impossible to communicate with the DAW (logic or pt). ----- this applies to faders, knobs, track names (if i change in DAW it's not updated in the controller) and other controls that implies a bi-directional communication 4) i can recover getting back to a basic applications like the finder and then going back to the daw, the connections then is restored, but as long as i move a fader all the sequence of problems is repeated exactly: basically then: when i do simple things that involves no level change or audio interaction everything goes well (use the touch screen to place markers, copy files in finder…trash items) everything goes well. when i do audio stuff that implies an advanced communication the controller goes offline! Please help! Alessandro Ratoci |
#2
|
||||
|
||||
Re: Euphonix Mc Control and PT9
After you upgraded to 2.5.7, did you update the controller firmware?
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
#3
|
|||
|
|||
Re: Euphonix Mc Control and PT9
RESOLVED: Network was configured well but INTERNET SHARING was active, so anytime i moved a fader the controller started to listen for data feedback from DAW and instead it probably got some webpages or spam :)
yes i had the firmware updated! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Euphonix MC Control | mbourque | Buy & Sell | 2 | 10-16-2013 10:09 PM |
Avid Artist Control vs Euphonix MC Control? | DAWgEAR | Artist Series | 3 | 10-22-2012 07:10 AM |
Euphonix MC Control V2 - Control room knob PT9HD-HELP | hugoleitao | Artist Series | 3 | 06-09-2012 06:03 PM |
PT8 and Euphonix mc control | Rockpolice | Pro Tools TDM Systems (Mac) | 6 | 05-12-2011 05:20 PM |
Euphonix MC Control vs HUI | propower | Pro Tools TDM Systems (Mac) | 3 | 08-23-2010 07:44 AM |