|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
PTHD 10 Stuck Booting Initializing Hardware DSI
Screen Shot 2014-12-17 at 1.24.17 AM.jpg
I was just finishing up a session tonight and I got an error after selecting a group on my ProControl. Then I shut down ProTools, restarted my Mac Pro, and then launched ProTools HD 10 again, and now I can't get past the booting up ProTools, while it's initiating hardware (DSI). I rebooted the computer again, I tried to run Digitest, it won't run either. Does anybody have any ideas what the problem could be?
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors. MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp |
#2
|
||||
|
||||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
Quote:
Have you tried booting without the pro control attached? First thing I would do is just run the pro tools installer to refresh the program files, and refresh/re install the PC driver. it will simply replace the files and not effect anything else. Might want to try running the combo updater for your OS incase a program file is corrupted etc. Also trash prefs etc and reinstall PT. Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#3
|
|||
|
|||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
I uninstalled last night, then reinstalled. Then Ran Digitest, before it would not even fully launch, this time it got about 75% through, then locked up. I then rebooted, launched PTHD10, it got almost to the point of fully launching and then locked up. PTHD11 starts no problem, but its running off the core audio card in the computer.
It was late, so I had to walk away, and will get back to it tonight. I hope all is ok. If anyone has any ideas, please let me know.
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors. MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp |
#4
|
||||
|
||||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
Start with a full prefs etc flush. That's probably all it'll take.
|
#5
|
|||
|
|||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
I trashed Preferencs, ran Digitest again, both accel cards pass, then it locks up at this point when testing core card.
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors. MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp |
#6
|
|||
|
|||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
Its all working now. I didn't do anything different the last time around than I did the times before. Deleted preferences, uninstalled PT, reinstalled PT, however, this time, I ate an entire pint of HagenDaz Strawberry Ice-cream (50 grams of fat, I should be a cow), and now it works.
I just don't understand why these things happen sometimes….
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors. MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp |
#7
|
|||
|
|||
Re: PTHD 10 Stuck Booting Initializing Hardware DSI
I was going to suggest the strawberry ice cream.
It always works for me too.
__________________
bookerv12 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PT HD stuck at "initializing hardware DSI" [RESOLVED] | tidalwave | Pro Tools TDM Systems (Mac) | 17 | 12-06-2019 09:06 PM |
PT HD8 - Stuck at Initializing Hardware (DSI) | RoofTopLuki | Pro Tools TDM Systems (Mac) | 5 | 07-07-2014 11:03 PM |
pro tools 10 HD stuck at Initializing Hardware (DSI) | blujway | macOS | 3 | 05-15-2012 04:28 AM |
I can't open Protools 8; stuck on Initializing Machine Control | ashtyn.eb | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 12-25-2009 03:07 PM |
Help! stuck on creating dae and midi when booting PT 7.3 | willl3 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 11-29-2007 07:18 PM |