ProTools LE 6.4 Download for Digi 001

[luidog]

I've spent the last 2 hours trying to get LE 6.4. I recently bought a Digi 001 off of ebay and need 6.4.

I've tried using the digidesign site and have found the download link @:
http://www.digidesign.com/index.cfm?...54&itemid=4959
The link at the bottom "Pro Tools LE 6.4 for Windows XP"

I'm then asked for my, "Authorization Code" which I don't have. I go to, "Lost LE Auth Code?" on the right and it takes me to MyDigi, where at first I had no Auth Codes, I then looked up my 6.* code and now I have one beginning with, "DIGI0600." But when I input the code given to me I get, "Warning: Software code specified is invalid "

Any ideas? I tried searching the forum but with no luck.

[Avid]

Found the problem, check your email.

[soav]

Hi All,

I encountered the same issue as 'luiDog'. I just purcahsed an 'used' Digi 001 with controller card from the internet and was given the Protools 6.4LE software for both Mac & PC(burned cd-r) but unfortunately, after installed it on my mac, an 'Authorization Code' is prompted to me to enter before i can use the Protools 6.4.

I tried check with the previous owner but was told that he had lost the codes & others.

Kindly anyone can help me ? Many thanks in advance!

Cheers.

[luke_violin]

Originally Posted by luidog

I've spent the last 2 hours trying to get LE 6.4. I recently bought a Digi 001 off of ebay and need 6.4.

I've tried using the digidesign site and have found the download link @:
http://www.digidesign.com/index.cfm?...54&itemid=4959
The link at the bottom "Pro Tools LE 6.4 for Windows XP"

I'm then asked for my, "Authorization Code" which I don't have. I go to, "Lost LE Auth Code?" on the right and it takes me to MyDigi, where at first I had no Auth Codes, I then looked up my 6.* code and now I have one beginning with, "DIGI0600." But when I input the code given to me I get, "Warning: Software code specified is invalid "

Any ideas? I tried searching the forum but with no luck.

Hi.
I've got this same problem.
Do you know, maybe, how to fix it?

[monkfink]

I'm in virtually exactly the same scenario.

Bought a Digi 001 off of ebay and need 6.4.

I'm then asked for my, "Authorization Code" but my 5.3.1 code is not valid.

Do i really have to go bac to SP1?

Any ideas? Any help really appreciated.

[sunburst79]

Originally Posted by monkfink

I'm in virtually exactly the same scenario.

Bought a Digi 001 off of ebay and need 6.4.

I'm then asked for my, "Authorization Code" but my 5.3.1 code is not valid.

Do i really have to go bac to SP1?

Any ideas? Any help really appreciated.

SP2 and SP3 should be fine. I'm on SP3

[John_Toolbox]

Originally Posted by monkfink

I'm in virtually exactly the same scenario.

Bought a Digi 001 off of ebay and need 6.4.

I'm then asked for my, "Authorization Code" but my 5.3.1 code is not valid.

Do i really have to go bac to SP1?

Any ideas? Any help really appreciated.

Your 5.3 auth code will not authorize 6.4. A 6.x install code will start with DIGI06... your PT 5.3 code will start with DIGI0531.... They are unique codes designed only to unlock a specific software version. Since PT 6 was a paid upgrade from version 5, it will require a different authorization code. If you didn't get a code with your 6.4 installer you can buy one from digidesign, last time I bought one for 6.4 it was about $35 so they're relatively cheap.

[studio1176]

Hey folks,
I'm also in a similar position.. I lost my authorization code in a fire and now I cannot install my software.
This is for an old iMac G4 with and Mbox with PT 6.2.2
I bought the mbox used several years ago, so I'm lost as to how to acquire an authorization code without spending more money.

can anyone help?

thanks!
Darcy
[email protected]

[John_Toolbox]

If it's registered in your name the auth code should be available in your avid account.

[EDF]

Originally Posted by John_Toolbox

If it's registered in your name the auth code should be available in your avid account.

None of these devices would be in our names.

What should I do?