M-Audio 02 not showing on Midi Input Enable window...

[jns2005]

Hello all & good day!

I have PT LE 7.3.1cs3 which I run using an original M-Box.

I spent a good deal of time yesterday searching the forum for an answer to my problem with some help but not enough to get me up and going and so here I am!

I am trying to run Sample Tank SE on an instrument track. My M-Audio 02 USB Midi Controller in not showing in the Midi Input Enable window. How do I get this to show?

I have updated the drivers for the 02.

I can pencil in notes that read on the track meter in the Midi portion of the instrument track but no sound. Also, upon playback, the notes do register in the track meter in the Midi portion of the instrument track but no sound.

1) The input of the Midi section of the instrument track = all
2) The output of the Midi section of the instrument track = Sample Tank Channel 1 (no channels activated)
3) The input of the auxillary section of the instrument track = no input
4) The output of the auxillary section of the instrument track = Analog 1-2 (stereo)

I have a sample loaded in Midi channel 1 in Sample Tank.

Any help anyone could give would be most appreciated, especially a step-by-step run through in possible!

Thanks in advance!


jns2005

[filosofem]

Jeff, you do know that the M-Audio 02 is Class-compliant? What procedures did you go through to install the 02?








filosofem