Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > Eleven Rack

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-07-2018, 08:59 PM
Cyguitar Cyguitar is offline
Member
 
Join Date: Apr 2018
Location: San Diego, CA
Posts: 6
Default Users of the 11R live direct into the P.A.

I have a couple of questions. I don't want big volume jumps or drops when switching patches. Only a bit of a jump for solos. I have set my rig balance on all patches I will be using to -7.5. I haven't ran it through our p.a. yet to see if it will work. Do you set all your patches at a certain volume on the rig balance? Should I set my patches at 0 (Unity)? Should I set up my solo patches at a higher amount on the rig balance, so they are a bit louder than my rhythm channels?
Reply With Quote
  #2  
Old 04-16-2018, 01:03 PM
DonaldR DonaldR is offline
Member
 
Join Date: Mar 2000
Location: Saint-Jerome, Quebec, Canada
Posts: 325
Default Re: Users of the 11R live direct into the P.A.

I have my solo patches a bit louder than the others.
Reply With Quote
  #3  
Old 04-22-2018, 04:09 PM
Cyguitar Cyguitar is offline
Member
 
Join Date: Apr 2018
Location: San Diego, CA
Posts: 6
Default Re: Users of the 11R live direct into the P.A.

I am trying to use an expression pedal for wah. I have it plugged into P2. I made sure pedal is set to wah on the 11R, and P2 is on, on the GCP, with value 004 (Wah postion). When I step on the pedal nothing happens. Should I set the wah bypass 043 value to one of the Instant Access buttons (#8)? Or, should I set the pedal control to 043 on the GCP, to control wah bypass?
Reply With Quote
  #4  
Old 04-23-2018, 07:10 AM
Darryl Ramm Darryl Ramm is offline
Member
 
Join Date: Nov 2010
Location: USA
Posts: 11,809
Default Re: Users of the 11R live direct into the P.A.

Quote:
Originally Posted by Cyguitar View Post
I am trying to use an expression pedal for wah. I have it plugged into P2. I made sure pedal is set to wah on the 11R, and P2 is on, on the GCP, with value 004 (Wah postion). When I step on the pedal nothing happens. Should I set the wah bypass 043 value to one of the Instant Access buttons (#8)? Or, should I set the pedal control to 043 on the GCP, to control wah bypass?
I have never used a GCP but this should not be hard. I can’t follow what you are exactly doing, but this should not be hard for you to troubleshoot.

What exact expression pedal, connected with what exact cable into pedal port 2 on the GCP?

“pedal set to wah”? Where? In the Eleven Rack, this is irrelevant, you are not using an Expression pedal on the Eleven Rack, you are using a MIDI cc controller.... that happens to have an expression pedal attached.

Why are you worried about wah bypass? Is the wah in the rig on or off... look at the front panel? Does moving the expression pedal attached to the GCP cause the wah pedal to move on the Eleven Rack screen? Or are you also trying to get the pedal to do bypass? (It can’t do that)

If not... is the GCP even sending anything?.... install any one of many MIDI
debug/sniffer/capture tools on your computer and look at exactly what the GCP is sending.
Reply With Quote
  #5  
Old 04-23-2018, 07:14 AM
DonaldR DonaldR is offline
Member
 
Join Date: Mar 2000
Location: Saint-Jerome, Quebec, Canada
Posts: 325
Default Re: Users of the 11R live direct into the P.A.

I have dedicated patches for wah as I eq a bit differently and add a bit more gain. So on those patched the wah is always on and don't turn it on/off.
Have you calibrated the pedal? This will show you values as you move it.
Have you assigned the pedal to control wah on the rig?
Reply With Quote
  #6  
Old 04-23-2018, 10:33 AM
Cyguitar Cyguitar is offline
Member
 
Join Date: Apr 2018
Location: San Diego, CA
Posts: 6
Default Re: Users of the 11R live direct into the P.A.

Quote:
Originally Posted by Darryl Ramm View Post
I have never used a GCP but this should not be hard. I can’t follow what you are exactly doing, but this should not be hard for you to troubleshoot.

What exact expression pedal, connected with what exact cable into pedal port 2 on the GCP?

M-Audio EX-P.

“pedal set to wah”? Where? In the Eleven Rack, this is irrelevant, you are not using an Expression pedal on the Eleven Rack, you are using a MIDI cc controller.... that happens to have an expression pedal attached.

Ok, got it.

Why are you worried about wah bypass? Is the wah in the rig on or off... look at the front panel? Does moving the expression pedal attached to the GCP cause the wah pedal to move on the Eleven Rack screen? Or are you also trying to get the pedal to do bypass? (It can’t do that)

I want to be able to turn the wah on (and off) for all my patches. I don't use the wah often but, if the need arises, I want the ability.


If not... is the GCP even sending anything?.... install any one of many MIDI
debug/sniffer/capture tools on your computer and look at exactly what the GCP is sending.
I may have to assign the wah bypass to an instant access button on the GCP, to turn it on and off. I'll try a couple of things to see what works.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any reason or Live users here? cary chilton 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 6 02-15-2007 08:16 AM
direct connect users kymera 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 5 10-30-2003 02:39 AM
Using Direct I/O in 6.1 with Ableton Live nz 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 0 10-20-2003 01:03 PM
SB Live users... Equinator Digidesign Hardware & Software 3 11-30-2000 03:20 AM
Direct Connect for Content PTIII Users? Felix General Discussion 2 02-28-2000 09:53 PM


All times are GMT -7. The time now is 07:45 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com