Discrepancy on Faders in Flip mode

[Leoespejo]

I've seen a serious discrepancy and a big mistake when using Pan in Flip mode:

- In the Pan section of the autmation layer Left is Up and Right is down.
- When I in autommation mode using in Flip mode (faders controling Pan and sliders controling volume) moving the fader up pans to right and moving the fader down pans to left (really confusing)
- But then when PT is reading the automation the faders follow the screen, so fader moves up when pans goes to Left and it goes down when pans goes to Right.

Come On Faders should always correspond to the screen, otherwise is really confusing and time wasting.

[EddieJones]

Originally Posted by Leoespejo

- When I in autommation mode using in Flip mode (faders controling Pan and sliders controling volume) moving the fader up pans to right and moving the fader down pans to left (really confusing)

This all depends on which way you are looking at the time line, not to mention that the pan knob in the mixer would move the wrong way if this was changed.

Originally Posted by Leoespejo

But then when PT is reading the automation the faders follow the screen, so fader moves up when pans goes to Left and it goes down when pans goes to Right.

Not seeing this here the fader moves the same as when the automation was written