|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Massive CPU overload and glitching all of a sudden +9128 error
Hi,
This has suddenly stared happening after running fine for months/years. CPU usgae is about 15%-20% and sessions have been running fine but suddenly i'm getting CPU overloads and the sound is glitching and sometime just stops. with 9128 errors. happening on different sessions. So looking at likely hardware causes. so far checked.. Geekbench stress test Rember Ram test Although i'm not sure how accurate these tests are? Different system drive different audio drive ............> Just running Digi test now Going to swap ram as i have some spare re-seat all hard drives re-seat PCI cards Re-seat PCI cards all 6 in magma chassis check re-seat magma connections and flex cables Ive got spare core card/ accel cards and interfaces to swap and check. Anything i've forgotten here? any other ideas? Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#2
|
||||
|
||||
Re: Massive CPU overload and glitching all of a sudden +9128 error
No expert here, but just throwing out a couple of things:
Nothing changed in plugin-folder? No change in prefs? No change in hardware? Have you something to monitor temperature on the system? Have you tried opening sessions without plugins (press shift). I know this will reduse cpu load alot, but it might tell you somethin, f.ex if the errors still persist. |
#3
|
|||
|
|||
Re: Massive CPU overload and glitching all of a sudden +9128 error
Good suggestions from Ben, this sounds like a rogue plugin issue. Remember: You don't need to have a plugin instantiated for it to potentially cause errors in Pro Tools. Try moving any new plugin purchases to the "unused" folder one-by-one to try and narrow it down.
|
#4
|
||||
|
||||
Re: Massive CPU overload and glitching all of a sudden +9128 error
Quote:
__________________
Janne What we do in life, echoes in eternity. |
#5
|
||||
|
||||
Re: Massive CPU overload and glitching all of a sudden +9128 error
Hi,
Thanks for all the suggestions. Just to clarify there's been no change to the plugins for a long time, this only started yesterday. Although removing plugins from the session helps a bit its still there with very basic plugins. I have just discovered that one of my internal hard drives used for storing backups etc was making an almost constant sound, activity disk sound but a bit louder and rougher sounding and looking at System usage window i can see this hard drive is showing a lot of activity even when the computer is doing nothing. I'm just copying the info off this drive to another drive then i'll test again. Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#6
|
||||
|
||||
Re: Massive CPU overload and glitching all of a sudden +9128 error
If it's a backup drive, why not just physically disconnect it from the computer and test again? If the problem goes away it is almost certain the drive itself is a lemon
__________________
Janne What we do in life, echoes in eternity. |
#7
|
||||
|
||||
Re: Massive CPU overload and glitching all of a sudden +9128 error
Quote:
Hi, Thats what i'll be doing but as ive got the computer away and unplugged from everything and on its own i'm just copying the data to a new drive before i put it all back together. also going to clean everything whilst its out and apart. Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
-9173 Error HELP | anotherone | Pro Tools 2018 | 25 | 03-01-2020 02:30 AM |
CPU overload! ( AAE- 9173 ) | SWBoatman25 | Pro Tools 12 | 6 | 11-27-2016 04:44 PM |
cpu spikes 1% to overload randomly, aae 9173 | stratcat18 | Pro Tools 12 | 13 | 07-10-2016 11:37 AM |
Massive CPU overload, then stays overloaded. | Drywsef | Windows | 8 | 07-03-2013 07:11 AM |
Sudden CPU overload | David_Greenwood | macOS | 3 | 08-25-2011 07:07 AM |