No audio from my Mbox 2 mini PT 10

[bboy357]

I just finish setting up my PT10 system on my Mac pro tower running lion 10.7.5. Everything seems to be working fine intill I added an Mbox 2 mini as my interface and I'm unable to hear any audio. The session plays and my meters are showing just no audio. Before this I was able to hear from my towers built in speaker and on head phones connected to my computer. Please tell me what I should select or do, What am I missing here

Note: I did download the latest legacy drivers from AVID for USB interfaces Mbox 2 mini. It turned the green light on and my box is listed as an interface in PT and
Note : I have PT 10.0 not the 10.3.8 version

Thanks in advance for any help

[bboy357]

^^^^BUMP^^^
PLEASE CAN ANY ONE HELP ME

[Phil Ogden]

Go into Set-up > I/O and select default.

Make sure the Mbox is selected as the playback engine.

[bboy357]

Thanks but I have selected mbox mini and outputs 1 and 2

[Phil Ogden]

Try a different USB port on the tower and, if possible a replacement USB cable.

[bboy357]

just so you know I am receiving power because I see the green light on in front of the mbox but I will try a different port and then I will try a different cord

[bboy357]

I just tried using different usb ports and a new cord still to no avail. I know Im missing something here, can a fellow protooler get a hand so I can be on my way

[FajitaTone]

check the mix knob on the mbox?

[bboy357]

If you mean the monitor knowing in the front next to the head phone knob then
Yes I have tried it

[bboy357]

I just find it hard to believe know one here can help me