Eucon 3.3.2 constantly crashing

[Normann Büttner]

Is there any chance the "missing repeat function bug" for the soft keys (hold down and repeat command as long until soft key is released) will get fixed any time? It worked fine in EuControl V2 versions but in NONE of the V3s inluding 3.3.2.
The function is still there in the "commands" editing window for the soft keys, but repeats maximum twice instead of "as fast as possible" or any other value you enter in the repeat field

[Wizzoboy]

Albee, all running very well here with no problems. Only thing I had to do when installing was to repair Bonjour which was not helping the installation. Only downside of Control, it steals the meter display from the HUI. Apart from that they are best of friends.

[albee1952]

Originally Posted by Wizzoboy

Albee, all running very well here with no problems. Only thing I had to do when installing was to repair Bonjour which was not helping the installation. Only downside of Control, it steals the meter display from the HUI. Apart from that they are best of friends.

I'm having somewhat better luck with a new Lynxys 5G dual-band router, but I still need to re-start Eucon before anything works the first time of the day. If I take a long break, its likely that I will also need to re-start.

[albee1952]

I get this error on every boot, but once I restart Eucon, things seem to work pretty well.

[WKG]

Eucon isn't getting blocked by your firewall is it? Also, 5khz WiFi is recommended.

[albee1952]

Originally Posted by WKG

Eucon isn't getting blocked by your firewall is it? Also, 5khz WiFi is recommended.

Running 5KHz and seeing no messages regarding firewall. as I said, restarting Eucon USUALLY puts things working To those NOT using a 5K dual-band router, it actually is much better now then when I had a cheaper n router in place. This does give me pause to wonder if I should(or can) tell Eucon to always Run as admin.

20 minutes later, no, that didn't help

[Jason4127]

It does that to me too.

[WKG]

Originally Posted by albee1952

Running 5KHz and seeing no messages regarding firewall. as I said, restarting Eucon USUALLY puts things working To those NOT using a 5K dual-band router, it actually is much better now then when I had a cheaper n router in place. This does give me pause to wonder if I should(or can) tell Eucon to always Run as admin.

20 minutes later, no, that didn't help

The reason I asked was because when I installed 3.3.2 and ran it the first time I got a firewall dialog screen, I allowed it and haven't had an issue. I always run V-Control on the 5k band also.

[albee1952]

Hmmm, I vaguely remember seeing a firewall message when I first started using it with my office router(30' away in another room). Giving it the okay then must have transferred thru to the re-install.

[albee1952]

Okay, I am having a serious WTF moment here. After 3 days of reasonable success, and a simple-but-consistent method of restoring communication, today it simply will not work at all. The iPad shows "connected" and the name of my computer, but the CONTROL program shows no tracks and does nothing. After several restarts of Eucon, I now get a message that this version of Eucon doesn't work with this version of PT(11.3). How can it work well for 3 days, and then stop and tell me it can't work......

20 minutes later, and jumping thru several hoops, standing on one leg, pointing the coat hanger East and chanting....its working again(yes, even after telling me it can't work, throwing an access violation and a dozen restarts of Eucon)........