Pro Tools HD 10 ADAT trouble with 192

[fatcode]

Hi, I've moved from my pro tools HD3 on G5 to a Hackintosh with Pro tools HD 10 and I have trouble setting the ADAT for my Digidesign 192. On the G5 all I had to do was to set in the IO control panel Digital (All format) and my RME ADI 8 would work nicely.

On Pro Tools HD 10 on the Hackintosh in the IO control panel I can select Digital (All formats) for the output but not for the input. I can set ADAT for all inputs channels but then it does not work...(if I set ADAT format in the output it doesn't work in the same way )so far I got the output to work by setting Digital (All formats) but I don't manage to do the same for the inputs.

I tried to import my G5 IO settings to Pro Tools HD10 but it didn't work..

I treid to find some references for the Digital (All formats) that I was using on the G5 but no mention in the manuals..

Any ideas ?

Thanks, Dan

[Craig F]

sample rate? (ADAT won't work above 48k)
did you do your Bus to Output mapping? (I/Os before 9 need to be mapped to work)

[fatcode]

Sorted - I had to check ADAT option in the IO settings, this got things going.