S3L X AVB device not showing in iMac

[chamikalak@gmail.com]

I have S3L-X system using in my band and we are using the same system for doing our Studio recordings as well. Once in a while, once a recording is done and shutdown the system for the day and when we power on the system it gets unrecognized from iMac but the network works fine. In the mean time S3 surface could be connected as EUCON device but not as AVB device.

We are confident that we always follow the startup guidelines as per manual .Only solution we identified is to reinstall MAC OS. We had this issue around 5 times over last few months.

When the issues arises if I disconnect the network cable and reconnect it to a Macbook, system works as expected.

Is there anyone who faced a situation similar or related ?If so please share your experience. Anybody has a solution for this other than reinstalling please kindly share your thoughts and ideas.

Best regards
Chamika

System

iMac (Retina 5K, 27-inch, Late 2015)
CAT 6

[RyanJ]

It's an OS issue, the AVB applications and preferences can get corrupted in the OS, and the OS itself blocks itself from fixing it. To fix this issue, disable SIP


Reboot the mac while holding Command R
Once it boots into recovery mode
Open Terminal from the Utilities Menu
Type csrutil disable hit enter
Type reboot hit enter


enjoy