MTRX and MTRX STUDIO together?

[kingtone]

I was planning on adding another MTRX ST and HDX card to my system, but can possibly get a good deal on a MTRX and HDX.
Does anyone know if you can have a mixture of MTRX ST and MTRX in the one system without problems?
MTRX ST off HDX#1 and MTRX off HDX#2
(Obviously monitoring only off one of the units. )

Apologies if this has been asked/answered… my searches didn’t come up with any solid answers


Sent from my iPhone using Tapatalk

[BScout]

Yes. You can (have done it)
They show up as different devices in DADman (they are, of course, self-contained -- there isn't any patching between the two unless you run cables between them like Dante/Dante Controller patching)

[kingtone]

Originally Posted by BScout

Yes. You can (have done it)
They show up as different devices in DADman (they are, of course, self-contained -- there isn't any patching between the two unless you run cables between them like Dante/Dante Controller patching)

Perfect. Thanks BScout!
That’s exactly how I intend to use/patch.


Sent from my iPhone using Tapatalk

[BScout]

Also, an FYI, the MTRX Studio converters and the MTRX don't have the exact same delay times (it's close but not exactly the same.) Just a warning if you plan to do any parallel compression/parallel signals to make sure direct in signal and processed signal are on the same unit (if a signal source is being patched elsewhere like on a patchbay or mastering router before entering the DAW/converters)

[kingtone]

Originally Posted by BScout

Also, an FYI, the MTRX Studio converters and the MTRX don't have the exact same delay times (it's close but not exactly the same.) Just a warning if you plan to do any parallel compression/parallel signals to make sure direct in signal and processed signal are on the same unit (if a signal source is being patched elsewhere like on a patchbay or mastering router before entering the DAW/converters)

Good reminder.
I had actually noticed that in my research.
Appreciate the reminder tho!


Sent from my iPhone using Tapatalk