19.12?

[creativecontrol]

I’m not seeing any of these issues with the latest versions of all 3 DMG EQ plug-ins and 19.12. It’s more likely it has to do with the plug-ins which proceed or follow these EQ’s on your channels.


Jeff


Sent from my iPhone using Tapatalk Pro

[rcutz]

From A to D :

Fabfilter desser
Equality
Fabfilter pro Mb
Fabfilter Pro Q3
Mcdsp Sa2
Cedar dns one

Can you test there, cause I already reset to 19.9 and PT 19.12?

[creativecontrol]

No issues here.

The picture you posted is of the (correct) expanded EQ appset for McDSP SA-2. It appears that you inadvertently cycled through and landed on SA-2 presuming it was in fact DMG Equality.


best,


Jeff

[rcutz]

Originally Posted by creativecontrol

No issues here.

The picture you posted is of the (correct) expanded EQ appset for McDSP SA-2. It appears that you inadvertently cycled through and landed on SA-2 presuming it was in fact DMG Equality.

ohh.. I see. but...
I have set my cycling to start at the slot B (equality).

So, by the info you gave me, the SA2 is expanding on the first press on the EQ button - shouldn't it be the Equality? And even after several presses, the Equality did not shows up - no cycling occurs.

So my complaining was wrong, but now, knowing that you bring up, I understand that when I press the EQ button the first EQ is to come up, right? If that assumption was right, is there some issue here?

Is it possible to set S6/Pro Tools to not cycle?

best
Ricardo

[creativecontrol]

No. I’m note sure why it would be necessary to disable cycling? It requires a pretty deliberate multi-push to get it into a cycle mode.


Jeff



Sent from my iPhone using Tapatalk Pro