|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Lost Lynx Aurora channels 9-16 into Pro Tools after HD1 to HD2 Upgrade
Hi Folks
recently added a PCIe HD2 Accel card to my system. All seemed to be good until I had a session last night and channels 9-16 would not show up in pro tools. I ended up pulling out the Accel card and running HD1 as we have in the past so we could get channels 9-16 back and track the session I'm running a Mac Pro 1.1 with a 2x2.66GHZ dual core and 5 GB or ram. OS is 10.6.8 and I'm running pro tools 8.1.1 Interface is a Lynx Aurora 16 with a single 12' digilink cable connected to the HD core card Any ideas what might be going on? thanks! Warren Jurgens Meridian Sound Olathe, KS |
#2
|
|||
|
|||
Re: Lost Lynx Aurora channels 9-16 into Pro Tools after HD1 to HD2 Upgrade
Well, looks like I got it figured out!
went into set-up / Hardware and found the inputs for channels 9-16 were set to AES/EBU... changed those to Analog and all is now working with the Accel card installed Warren |
#3
|
||||
|
||||
Re: Lost Lynx Aurora channels 9-16 into Pro Tools after HD1 to HD2 Upgrade
That ol' nugget Any time you trash prefs, that will likely default back to AES so keep that thought tucked away for future reference. The setups on my rig(2x HD IO, a 192 and a mix of analog and lightpipe), its complicated enough that I saved screen captures of each setup window for future recall
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lynx Aurora 8 not working with Pro Tools 12.4 | ThijsDeMelker | Pro Tools 12 | 3 | 02-17-2016 01:02 AM |
Lynx Aurora 16 with Pro Tools 12? | cristian-eno | Third Party Interfaces | 4 | 02-09-2016 08:17 PM |
Lynx Aurora to TDM card Pro Tools 10HD | purnell263 | Third Party Interfaces | 4 | 10-04-2015 08:15 PM |
Pro Tools 9 Hardware Insert Delay Compensation with Lynx AES16e and Aurora 16 | SolutionRoom | macOS | 0 | 04-08-2011 10:54 AM |
Lynx Aurora HD - Pro Tools 9 clocking question | the barn studios | Pro Tools TDM Systems (Mac) | 0 | 03-25-2011 02:27 PM |