Digidesign 003 Factory with Windows XP 32

[Phil003]

Hello!

I own a PC with Windows XP 32 bit.
My questions would be if the Digidesign 003 Factory works properly with my Windows XP 32 bit enviroment?

Thanks for the help.

Phil

[DGraham]

It will if the rest of your PC is compatible, sure.


Go through the sticky posts in the top section of this forum, specifically the "Help us help you - what you need to know before posting!" sticky. You'll probably find a lot of what you need there.


If not, the folks that can really help you here will need more info about your PC. That sticky will let you know what you need to provide.

[albee1952]

Yes, post a Sandra report and that will help determine if your system might be compatible. At the very least, you will need an approved firewire card, or port on the motherboard that uses a TI chipset, as well as a second 7200 rpm hard drive for recording(no USB drives allowed). Scroll up to the top of this page and click on Compatibility Information for more info.

[TOM@METRO]

Originally Posted by Phil003

Hello!

I own a PC with Windows XP 32 bit.
My questions would be if the Digidesign 003 Factory works properly with my Windows XP 32 bit enviroment?

Thanks for the help.

Phil

Read through these threads and you will find all about how to post a Sandra report to tell us about your system.

http://duc.digidesign.com/showthread.php?t=193637

http://duc.digidesign.com/showthread.php?t=133039