|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Latency between left to right outputs
I have just started using PT M-Powered 8 with my fast track pro.
There is and acute playback problem - mainly latency between the left and right outpoots. But also dropouts and distorsion too. What I tryed doing 'till now: I played around with the playback engine parameters in every possible way. Tryed changing the USB cable/headphones/and even brought over a similar sound card which still had the same problem. Any help will be appriciated! Mike computer specs: win XP sp3 32 bit Mainboard : Gigabyte P55A-UD3 > Chipset : Intel P55 > Processor : Intel Core i5 750 @ 2666 MHz > Physical Memory : 4096 MB 2 x 2048 DDR3-SDRAM |
#2
|
|||
|
|||
Re: Latency between left to right outputs
How did you test this?
I would like to test it on my own system to see what my results are. Edit: The Latency between channels, not the distortion or dropouts. |
#3
|
|||
|
|||
Re: Latency between left to right outputs
I just tryed working a session on an external USB WD 7200rpm hard drive and it seems to be OK now for the first time. Hopefully this is will solve the problem for good
|
#4
|
|||
|
|||
Re: Latency between left to right outputs
USB drives are not supported and have been known to cause problems with Pro Tools. Was the latency between channels a lot? Did you do a loop back to check the outputs or were you just hearing latency?
|
#5
|
||||
|
||||
Re: Latency between left to right outputs
necjamc is correct, you will most likely get into trouble using a drive with know issues.
__________________
~ tom thomas Formerly hobotom Pro Tools Ultimate 2024 HDX Hybrid HD Omni and 192 I/Os Windows 10 Intel Hexcore i7 All Samsung Pro SSDs Ampex MM1200 2" 24 trk tape Outboard: UREI, Eventide, Lexicon, Yamaha, TC Electronics, Orban, ART, EchoAudio, Dolby, Hughes, API, Neve, Audio Arts, BBE, Aphex, Berringer, MOTU, dbx, Allison, etc. Plug-ins: Too many to talk about. www.metrostudios.com |
#6
|
|||
|
|||
Re: Latency between left to right outputs
What drive would you recommended?
|
#7
|
|||
|
|||
Re: Latency between left to right outputs
Glyph FW drives, You can get them from sweetwater, or Guitar Center. They are pretty much a standard in the industry.
Or if it's a desktop, WD Caviar Black drives are good internal drives, a lot of people use them. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
using all analog outputs in low latency | stainless | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 11-20-2010 10:56 AM |
latency when using multiple outputs? | stainless | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 12-19-2009 09:01 PM |
Digi003 Left/Right Outputs Reversed | Podgorny | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 05-01-2008 09:24 AM |
Digi003 Left/Right Outputs Reversed | Podgorny | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 05-01-2008 09:21 AM |
Changing Low Latency outputs | morganpage | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 03-12-2008 09:00 AM |