|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
ix MicroDualMonitor card... Really bad?
So, is this card really to be avoided? The specs on the Matrox are much better, but is this one really BAD?
& if so, why? Anecdotes welcome! Thx, steveV (who really needs two monitors & is outta slots) |
#2
|
|||
|
|||
Re: ix MicroDualMonitor card... Really bad?
The ix micro card works ok, and is your only option at the moment. The Matrox card isn't Mac supported at the moment, and no plans to in the near future. The problem with the ix micro is that the first monitor is great with high resolution, fast refresh rate etc, but the second monitor output is limited, and the graphics are slower. It does work, and since it's your only option without going to an expansion chassis, I say go for it. I've been using dual monitors for 3 years now on ProTools, and it's well worth it. I've used the ixMicro dual card on a friends system, and use dual ATI 16mb cards for my system, but I have an expansion chassis.
|
#3
|
|||
|
|||
Re: ix MicroDualMonitor card... Really bad?
I'm using the ixmicro on three PT24 systems...I still have periodic stalling (for 10-sec or so every 7-min), but I need the slots, so I put up with it, at least until something better comes along! (Are you listening Matrox?)
|
#4
|
|||
|
|||
Re: ix MicroDualMonitor card... Really bad?
<<periodic stalling (for 10-sec or so every 7-min) >>
I'd call that severe... It's rugged to have to upgrade to a Mix system just to get a slot so that I can use two monitor cards... stv |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Load session on 1 DSP card in multi-card system? | John McDaniel | Post - Surround - Video | 2 | 03-08-2007 06:31 PM |
HD Core card to Accel card flex cable in Dell 670 | belouder | Pro Tools TDM Systems (Win) | 4 | 01-16-2006 07:55 PM |
can i substitue a firwire card for the uw scsi card on my beige g3? | Guitarman2k2 | Pro Tools TDM Systems (Mac) | 0 | 05-12-2003 10:57 AM |
MAC G3 w/PT LE 5.1, Audio Media III card, Adaptec 2940UW SCSI Card, & Studio4: $575 | cmcc | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 01-17-2002 11:40 PM |
re: VIDEO CAPTURE, Fuse card is approved but will Igniter card work as well? | ragbor | Pro Tools TDM Systems (Mac) | 0 | 12-08-2000 11:56 AM |