|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
DSP FARM CARD NOT BEING RECOGNIZED BY PT
Here i am again with another bizarre problem.
i have a Magma 7 slot expansion chasis with 4 MIX cards and 2 DSP farm cards, but only one of them is being recognized by the system. The revisions are OK and they were working fine, only one day i tried to open a big session which i was working on in the previous week and they were insuficient DSP resources, looked in the DSP usage window and voila! Two cards were missing! i shut off everything messed around a bit with the cables and the magma and when PT launched only the last one was missing. I suspect of a loose connection somewhere from the PCI slot of the CPU to the Magma chasis (maybe the cable). Other ideas? thanks again... Hans |
#2
|
|||
|
|||
Re: DSP FARM CARD NOT BEING RECOGNIZED BY PT
HI
ANYBODY OUT THERE? |
#3
|
||||
|
||||
Re: DSP FARM CARD NOT BEING RECOGNIZED BY PT
-Run DigiTest on the cards and see if all cards are recognized.
-Swap positions of the 2 DSP Farms and see if the problem (of not being recoginized) follows the card. -Try different nodes of the TDM ribbon cable. Brent |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DSP Farm card not recognized in OSX??? | soundboy35 | Pro Tools TDM Systems (Mac) | 13 | 01-27-2004 02:24 PM |
DSP Farm not recognized in PT6.01 | MXR | Pro Tools TDM Systems (Mac) | 1 | 04-19-2003 12:03 AM |
processing power QE farm card vs. mix farm card | lennox | Digidesign Hardware & Software | 3 | 03-03-2003 02:24 PM |
'Classic' Farm vs. Mix Farm card - both have SRAM? | Last Legend | Pro Tools TDM Systems (Mac) | 1 | 02-15-2003 04:46 PM |
Mix Farm not recognized with d24 in 9600 | mikejavo | Pro Tools TDM Systems (Mac) | 5 | 10-25-2002 09:09 AM |