|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Master fader won't sync on Project mix i/o
Hi people,
When I set up a new template in pro tools m-powered, how do I set up the master fader with the default master fader on the project mix? When I move it it's as if the fader is set to touch mode. When I used my project mix with Logic it automatically synced up the master fader to the default fader on the project mix. Am I doing something wrong at the template set up stage? Again any advice would be welcome like a packet of hob nobs and a sweet cup of rosy to dunk em in! Thanks. |
#2
|
|||
|
|||
Re: Master fader won't sync on Project mix i/o
the master fader will not work with pro tools, i use that spot to set my cigarette pack...
|
#3
|
|||
|
|||
Re: Master fader won't sync on Project mix i/o
Though it's generally not a problem to use the 8th channel fader, they should
fix this. I always wondered why it was always like that. |
#4
|
|||
|
|||
Re: Master fader won't sync on Project mix i/o
because, protools supports multiple master faders...
|
#5
|
|||
|
|||
Re: Master fader won't sync on Project mix i/o
That's why they should fix it!!!
They support several master faders but not pro tools? What kinda sense does that make??
__________________
IMac 2.66 GHz Intel Core 2 Duo / 2 GB Mac OS X 10.5.7 Leopard Operating System M-Audio Project Mix I/O Protools M-Powered 7.4.2 Presonus Eureka Mic Preamp Rode NT2000 Condensor Mic M-Audio BX8a Studio Monitors Lacie 1TB External Hard Drive |
#6
|
|||
|
|||
Re: Master fader won't sync on Project mix i/o
your not paying attention, BECAUSE PRO TOOLS SUPPORTS MULTIPLE MASTER FADERS........
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Basic Gain Structure Fader/Master Fader Question | acmost | Pro Tools TDM Systems (Mac) | 1 | 05-16-2011 05:36 AM |
Transfuser on the master fader with ADC enabled makes bpm effects out of sync. | Rubicon | Virtual Instruments | 6 | 09-25-2008 10:43 AM |
Master Fader on Project Mix | InsaneMixaken | Pro Tools M-Powered (Win) | 1 | 04-13-2006 05:46 AM |
Master Fader 6.7 Master Fader issues | Bogner | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 06-19-2005 07:42 AM |
Master inserts are post-fader? Was: L1+ on Master = clipping | s2n | Pro Tools TDM Systems (Mac) | 10 | 11-20-2001 07:41 AM |