Two tips for dummies

[rdpar]

So I get no signal on any of my db25 outputs. Very strange since I have been using them to feed a headpone amp with no problem. now nothing, when I take an out put and plug it directly into my headphone amp . AAAARRRRGGGG. I need real one on one live help. Anyone hear from Gainesville fl?

[Darryl Ramm]

My guess is going to be the Console is messed up. It's already bit you with the other issue. Have you messed with the I/O matrix?

Are you following this: https://help.uaudio.com/hc/en-us/art...s-in-Pro-Tools

Maybe start with a full reset of the Console.

You should plan on spending hours or maybe a day or so just playing with Console with the manual open, start stand-alone with no DAW running, You have to get comfortable/understand Console. UAD also have lots of videos on YouTube and a good support forum (I don't see any real Pro Tools issues in the problems you've been having).

---

One other thing I'll do is put signal gen on a track and multi-select (i.e. CTRL-click on the outputs) *all* the outputs in the interface as outputs for that track. Then start probing with a multimeter etc. and see if they all have signal. A quick way to find problems where there is no signal.